Hi Jeff,
Once again thanks for your help.
Looking over the log I noticed that the conduit was trying to connect to the cellular network during the firmware upgrade, this could be due to the fact that the SIM card in the conduit was deactivated. Once I disabled the cellular connection on the Conduit the upgrade worked without a problem.
I mistakenly wrote over the original log but if you’d like to troubleshoot further I can recreate the configuration and generate a new log.
Best,
Shmuel
For class C every time a node connects it needs to be configured on the Conduit as well? Is there a way to automate this process?
Hi Jeff,
Thanks for your help.
I am using the web UI for the upgrade and it has previously worked when I upgraded to 1.2.2.
As you can see bellow it seems that the root file system is using only 32% of the available memory.
admin@mtcdt:~# df
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 237568 75564 162004 32% /
devtmpfs 127144 8 127136 0% /dev
tmpfs 127220 404 126816 0% /run
tmpfs 127220 436 126784 0% /var/volatile
/dev/mtdblock6 8192 632 7560 8% /var/config
/dev/mtdblock7 8192 512 7680 6% /var/oem
Does this help?