MTUSDK2-ST RS232 device driver problem

[Timothy Mulrooney]

I have the MTUSDK2-ST mDot development board. I can drop the file mdot-firmware-0.1.4.bin onto the board and use the RS232 to execute and use AT commands. I have a RS232 to USB cable to connect it to my PC. ALL AT commands work and the RS232 interface seems to work fine.
However when I load mDot_DigitalOut_BusOut_Example_MTS_MDOT_F411RE.bin as a sample program I get device driver errors.
ST-Link Debug – Other Devices
Unknown Device – Other Devices

I still see the COM port that had RS232-USB that worked for AT commands but I do not see any other device to connect to just these device drivers.
I have tried to let it search the Web for the correct drivers but nothing was found.

Any help in getting the debug console up and running for the mDot eval board would be greatly appreciated. I am dead in the water at this point.
I am new to mDot development and I am trying to get started.

[Jason Reiss]

Assuming you are using Windows, have you installed the ST-Link driver?

https://developer.mbed.org/teams/st/wiki/ST-Link-Driver

[Timothy Mulrooney]

Jason you are AWESOME!!!! I loaded the driver and all is working. Thank you so much.

[Author]

Posts