Hi,
if you’re using Windows: change your network setting like you did and disable / enable the network adapter.
It should work with putty like this.
If you’re using linux:
ssh mtadm@192.168.2.1 (if you’re using mtadm)
I always set the ipv4 to 192.168.2.2 but that shouldn’t change anything.
Cheers
Hi Jeff,
thank you for your response.
I did remove everything from the recipe but still get the same error.
Right now I am building only the given base recipe.
I did however build some other recipes but they are not included in the recipe anymore.