send/receive message via LoraWan and packet forwarder

[Hosein gh]

We are willing to setup a local LoraWAN network containing Libelium Plug & Sense and Multitech conduit mLinux. we have configured multitech conduit mLinux to work as a Packet Forwarder, which sends LoraWAN packets to our server over the ethernet. while testing the received packets in server with WireShark software, we cannot see the packet we constructed in libelium plug & Sense,which we assume to be caused by the way our code behaves in joining the network using ABP mode. the question is how we can send gathered sensors data using loraWAN and receive it in our server without compromising security?

In the past,we were using Loriot server as the back-end registeration server. How can we receive Libelium Plug & Sense sent packets without using Loriot? Actually I want to send Libelium Plug & Sense packets to my PC server via LoraWAN,with the help of Conduit gateway as a packet forwarder.

Please take heed that we’ve got the mLinux version of Multitech Conduit gateway, therefore Node-Red cannot be installed and used in this scenario.

Thanks in advance.

[Jason Reiss]

If you want to use Conduit in packet forwarder mode then you will need network server software on the server.

https://github.com/TheThingsNetwork/

Otherwise the lora network server in the Conduit can be used to handle the network session.

[Author]

Posts