Programming external xDot

Home › Forums › mDot/xDot › Programming external xDot

Tagged: 

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 20, 2017 at 10:04 am #16420
    kaz ola
    Participant

    Dear,
    we are considering moving to xDot from mDot.

    A mDot module is easy to place on top of UDK and remove and place on your custom board. They have side pins and so on.

    Differently, xDot have solder points on the PCB’s bottom plane. So, I guess we should design our breakout board, solder the xDot on top, and program via the JP1 connector.

    Am I right? Is there out there any design to easy this process which I’m missing? Please let me know.

    January 23, 2017 at 8:15 am #16432
    Mike Fiore
    Blocked

    Kaz Ola,

    We have a developer guide for the xDot which contains information about putting xDots on your own boards and programming them (chapter 13). It’s on the MTS xDot page.

    http://www.multitech.com/brands/multiconnect-xdot

    http://www.multitech.com/documents/publications/manuals/s000645.pdf

    Cheers,
    Mike

    January 23, 2017 at 9:37 am #16433
    kaz ola
    Participant

    Wow, did not see Chapter 13, sorry 🙂
    BTW, can the user picture be changed?

    February 7, 2017 at 10:24 am #16751
    kaz ola
    Participant

    [THREAD SOLVED]

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.