mDot Can't Make Connection To mLinux Conduit

[James Coleman]

When I issue the at+join command I receive the following error:

Join Error – Failed to join network

When I issue the tail -f /var/log/lora-network-server.log command,
the log reports the following error.

Tossing join request, invalid NET EUI

The mDot Firmware version is: 0.1.4
The mDot Library version is: 0.0.9

The mlinux-version is: 3.1.0

I am not sure what version of the Conduit Network Server and Package Forwarder is installed. How do I find out the version number for the Network Server and Package Forwarder?

Do I need to upgrade in order to make a connection or is there something else that is not configured correctly?

I verified that my network name and passphrase are the same for both the mDoT configuration and the Conduit configuration.

Thanks,

James

[Jason Reiss]

To list the currently installed versions of lora packages on Conduit:

$ opkg list | grep lora

Upgrade page for mLinux:

Upgrade LoRa Server & Packet Forwarder

Upgrade page for AEP:
http://www.multitech.net/developer/software/aep/upgrading-the-aep-firmware/

[James Coleman]

Jason,

Thanks for the information you provided. Provided below are the version numbers for the lora-network-server, lora-packet-forwarder and lora-query.

lora-network-server – 0.0.3-r0.0
lora-packet-forwarder – 1.4.1-r7.0
lora-query – 0.0.1-r0.0

Based on this information, am I not able to join the network with my mDot because I don’t have the correct versions of the lora-network-server and lora-packet-forwarder installed?

Thanks,

James

[Brandon Bayer]

James,

That is correct, you need to upgrade your lora software (see instructions Jason linked to).

-Brandon

[James Coleman]

Jason or Brandon,

I have one additional question for you. I am using a windows 7 professional computer and not a linux computer. I downloaded the most recent lora-packet-forwarder and lora-network-server files from the Downloads page.

They are stored in a directory on my Windows PC. How do I use the linux SCP command to copy both of the packages to the Conduit?

Thanks,

James

• This reply was modified 10 years, 1 month ago by James Coleman.

[James Coleman]

Brandon,

I figured out how to do it. I download Winscp and used this utility to copy the files over to the Conduit.

Thanks,

James

[James Coleman]

Brandon and Jason,

Thanks for your help. I am now able to join the network from my mDot Lora card.

James

[Author]

Posts