Conduit AEP and PPP
- This topic has 2 replies, 3 voices, and was last updated 7 years, 5 months ago by
.
Viewing 3 posts - 1 through 3 (of 3 total)
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.
Home › Forums › Conduit: AEP Model › Conduit AEP and PPP
Steve Kovarik.
Szymon ZiebaHi,
I was just checking methods for giving a roaming internet connection to the Conduit for testing and saw PPP as an option in the documentation. However, when I check the setup and options for the Conduit, no option exists for PPP. Does this mean that there is no PPP option for my Conduit?
In relation to the above, as I will need to be able to test the Conduit outside easy reach of Ethernet connections, is there any option to connect the Conduit to the internet without the PPP?
Regards
Jeff HatchSzymon,
On the AEP Conduit in the Web UI the Cellular options are what configure and control the PPP connection. You can enable access to the Web UI over the PPP connection by going to Administration->Access Configuration and enabling HTTPS Via WAN (upper right hand side of the page).
Jeff
Steve KovarikHi Szymon
We provide different build option of the Conduit Gateway,
some have an internal cellular modem capable of PPP for internet access
others do not have an internal cellular modem and only have an Ethernet
interface for access to the internet. If you provide the serial number off
the bottom of your unit, I can verify for you. Otherwise you can also tell
by the model number (on the bottom) and referencing the build options
listed on our website. http://www.multitech.com/brands/multiconnect-conduit
-Best Regards