Blocking error during Conduit Boots

Home › Forums › Conduit: AEP Model › Blocking error during Conduit Boots

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • June 14, 2016 at 6:33 am #13154
    Borja Iglesias
    Participant

    Hi.

    I´m traying to fix an issue at booting of my Conduit.

    I have modified init.d with execution of a “.bin” but there is an arror at booting, and the “.bin” tries to execute itself one, and one, and one more time.

    What can I do to fix this issue? I can´t acess to file system over ssh, and I wouldn’t like to re-flash Conduit.

    This is the debug-USB log

    AT91Bootstrap 3.5.3-r2 (Wed Jan 13 09:51:33 CST 2016)

NAND: ONFI flash detected

NAND: ManufáRomBOOT

AT91Bootstrap 3.5.3-r2 (Wed Jan 13 09:51:33 CST 2016)

NAND: ONFI flash detected

NAND: Manufacturer ID: 0x2c Chip ID: 0x32

NAND: Disable On-Die ECC

NAND: Initialize PMECC params, cap: 0x4, sector: 0x200

NAND: Image: Copy 0x80000 bytes from 0x40000 to 0x2ef00000
PMECC: sector bits = 0x1, bit 1 means corrupted sector, Now correcting...

Correct error bit @[#Byte 0x153,Bit# 0x1] 0x2 -> 0x0

NAND: Done to load image

U-Boot 2012.10-mtcdt-r6 (Jan 13 2016 - 09:51:29)

CPU: AT91SAM9G25
Crystal frequency:       12 MHz
CPU clock        :      400 MHz
Master clock     :  133.333 MHz
I2C:   ready
DRAM:  256 MiB
WARNING: Caches not enabled
NAND:  256 MiB
In:    serial
Out:   serial
Err:   serial
vendor-id:  Multi-Tech Systems
product-id: MTCDT-H5-210A
device-id:  18626542
hw-version: MTCDT-0.0
mac-addr:   00:08:00:4a:07:6f
Net:   macb0
Hit any key to stop autoboot:  0 

Loading from nand0, offset 0x200000
   Image Name:   mLinux/3.12.27/mtcdt
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2801123 Bytes = 2.7 MiB
   Load Address: 20008000
   Entry Point:  20008000
## Booting kernel from Legacy Image at 22000000 ...
   Image Name:   mLinux/3.12.27/mtcdt
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    2801123 Bytes = 2.7 MiB
   Load Address: 20008000
   Entry Point:  20008000
   Verifying Checksum ... OK
   Loading Kernel Image ... OK
OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
Booting Linux on physical CPU 0x0
Linux version 3.12.27 (jenkins@frylock) (gcc version 4.8.2 (GCC) ) #1 Wed Jan 13 08:31:22 CST 2016
Machine: Atmel AT91SAM (Device Tree), model: Multi-Tech Systems MTCDT
AT91: Detected soc type: at91sam9x5
AT91: Detected soc subtype: at91sam9g25
AT91: sram at 0x300000 of 0x8000 mapped at 0xfef70000
Kernel command line: mem=256M console=ttyS0,115200 root=/dev/mtdblock8 ro rootfstype=jffs2
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Virtual kernel memory layout:
    vector  : 0xffff0000 - 0xffff1000   (   4 kB)
    fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
    vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
    lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
    modules : 0xbf000000 - 0xc0000000   (  16 MB)
      .text : 0xc0008000 - 0xc04ef50c   (5022 kB)
      .init : 0xc04f0000 - 0xc0517cbc   ( 160 kB)
      .data : 0xc0518000 - 0xc05407a0   ( 162 kB)
       .bss : 0xc05407a0 - 0xc055f408   ( 124 kB)
NR_IRQS:16 nr_irqs:16 16
sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
Calibrating delay loop... 199.06 BogoMIPS (lpj=995328)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
Initializing cgroup subsys blkio
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0xc03a9b70 - 0xc03a9bc8
devtmpfs: initialized
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
AT91: Power Management (with slow clock mode)
AT91: Starting after power-restored wakeup
gpio-at91 fffff400.gpio: at address fefff400
gpio-at91 fffff600.gpio: at address fefff600
gpio-at91 fffff800.gpio: at address fefff800
gpio-at91 fffffa00.gpio: at address fefffa00
pinctrl-at91 pinctrl.2: initialized AT91 pinctrl driver
bio: create slab <bio-0> at 0
at_hdmac ffffec00.dma-controller: Atmel AHB DMA Controller ( cpy slave ), 8 channels
at_hdmac ffffee00.dma-controller: Atmel AHB DMA Controller ( cpy slave ), 8 channels
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
i2c-gpio i2c.3: using pins 30 (SDA) and 31 (SCL)
i2c-gpio i2c.4: using pins 64 (SDA) and 65 (SCL)
Switched to clocksource tcb_clksrc
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
ROMFS MTD (C) 2007 Red Hat, Inc.
msgmni has been set to 496
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered (default)
io scheduler deadline registered
io scheduler cfq registered
fffff200.serial: ttyS0 at MMIO 0xfffff200 (irq = 16, base_baud = 8333333) is a ATMEL_SERIAL
console [ttyS0] enabled
f8040000.serial: ttyS1 at MMIO 0xf8040000 (irq = 26, base_baud = 8333333) is a ATMEL_SERIAL
brd: module loaded
loop: module loaded
at24_get_setup: found a match for eeprom at 56
at24 0-0056: 512 byte 24c04 EEPROM, writable, 16 bytes/write
sam9x5: read 512 bytes from id eeprom
at24_get_setup: found a match for eeprom at 50
at24 1-0050: 512 byte 24c04 EEPROM, writable, 16 bytes/write
sam9x5: read 512 bytes from ap1 eeprom
at24_get_setup: found a match for eeprom at 52
at24 1-0052: 512 byte 24c04 EEPROM, writable, 16 bytes/write
sam9x5: ap2 eeprom read failed: -110
atmel_nand 40000000.nand: Using dma0chan0 for DMA transfers.
ONFI param page 0 valid
ONFI flash detected
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xaa (Micron MT29F2G08ABBEAHC), 256MiB, page size: 2048, OOB size: 64
atmel_nand 40000000.nand: ONFI params, minimum required ECC: 4 bits in 512 bytes
atmel_nand 40000000.nand: Initialize PMECC params, cap: 4, sector: 512
Scanning device for bad blocks
9 ofpart partitions found on MTD device atmel_nand
Creating 9 MTD partitions on "atmel_nand":
0x000000000000-0x000010000000 : "NANDFlash"
0x000000000000-0x000000040000 : "at91bootstrap"
0x000000040000-0x0000000c0000 : "u-Boot"
0x0000000c0000-0x000000160000 : "u-Boot Config"
0x000000160000-0x000000200000 : "u-Boot Redundant Config"
0x000000200000-0x000000800000 : "uImage"
0x000000800000-0x000001000000 : "Config"
0x000001000000-0x000001800000 : "OEM Config"
0x000001800000-0x000010000000 : "Rootfs"
libphy: MACB_mii_bus: probed
macb f802c000.ethernet eth0: Cadence MACB at 0xf802c000 irq 23 (00:08:00:4a:07:6f)
macb f802c000.ethernet eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=f802c000.etherne:00, irq=-1)
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-atmel: EHCI Atmel driver
atmel-ehci 700000.ehci: EHCI Host Controller
atmel-ehci 700000.ehci: new USB bus registered, assigned bus number 1
atmel-ehci 700000.ehci: irq 31, io mem 0x00700000
atmel-ehci 700000.ehci: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.12.27 ehci_hcd
usb usb1: SerialNumber: 700000.ehci
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
at91_ohci 600000.ohci: AT91 OHCI
at91_ohci 600000.ohci: new USB bus registered, assigned bus number 2
at91_ohci 600000.ohci: irq 31, io mem 0x00600000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: AT91 OHCI
usb usb2: Manufacturer: Linux 3.12.27 ohci_hcd
usb usb2: SerialNumber: at91
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
rtc (null): invalid alarm value: 1900-1-1 0:0:0
at91_rtc fffffeb0.rtc: rtc core: registered fffffeb0.rtc as rtc0
at91_rtc fffffeb0.rtc: AT91 Real Time Clock driver.
i2c /dev entries driver
at91sam9_wdt: enabled (heartbeat=15 sec, nowayout=0)
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (3973 buckets, 15892 max)
ipip: IPv4 over IPv4 tunneling driver
gre: GRE over IPv4 demultiplexor driver
ip_gre: GRE over IPv4 tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
NET: Registered protocol family 17
l2tp_core: L2TP core driver, V2.0
Key type dns_resolver registered
at91_rtc fffffeb0.rtc: setting system clock to 2016-06-14 11:14:25 UTC (1465902865)
usb 1-2: new high-speed USB device number 2 using atmel-ehci
usb 1-2: New USB device found, idVendor=0424, idProduct=2534
usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-2:1.0: USB hub found
hub 1-2:1.0: 4 ports detected
usb 2-3: new full-speed USB device number 2 using at91_ohci
usb 2-3: New USB device found, idVendor=04e2, idProduct=1412
usb 2-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-2.1: new high-speed USB device number 3 using atmel-ehci
usb 1-2.1: New USB device found, idVendor=0403, idProduct=6014
usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-2.1: Product: Single RS232-HS
usb 1-2.1: Manufacturer: FTDI
usb 1-2.3: new high-speed USB device number 4 using atmel-ehci
usb 1-2.3: New USB device found, idVendor=1bc7, idProduct=0021
usb 1-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-2.3: Product: Telit Wireless Module
usb 1-2.3: Manufacturer: Telit wireless solutions
usb 1-2.3: SerialNumber: 356136071641528
jffs2: Empty flash at 0x077954a8 ends at 0x07795800
jffs2: notice: (1) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
VFS: Mounted root (jffs2 filesystem) readonly on device 31:8.
devtmpfs: mounted
Freeing unused kernel memory: 156K (c04f0000 - c0517000)

INIT: version 2.88 booting

jffs2: notice: (73) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
jffs2: notice: (73) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
Starting udev
udevd[87]: starting version 182
atmel_spi f0000000.spi: version: 0x212
atmel_spi f0000000.spi: Using dma0chan1 (tx) and dma0chan2 (rx) for DMA transfers
atmel_spi f0000000.spi: Atmel SPI Controller at 0xf0000000 (irq 28)
atmel_spi f0000000.spi: master is unqueued, this is deprecated
cdc_acm 1-2.3:1.0: This device cannot do calls on its own. It is not a modem.
cdc_acm 1-2.3:1.0: ttyACM0: USB ACM device
cdc_acm 1-2.3:1.2: This device cannot do calls on its own. It is not a modem.
cdc_acm 1-2.3:1.2: ttyACM1: USB ACM device
cdc_acm 1-2.3:1.4: This device cannot do calls on its own. It is not a modem.
cdc_acm 1-2.3:1.4: ttyACM2: USB ACM device
cdc_acm 1-2.3:1.6: This device cannot do calls on its own. It is not a modem.
cdc_acm 1-2.3:1.6: ttyACM3: USB ACM device
cdc_acm 1-2.3:1.8: This device cannot do calls on its own. It is not a modem.
cdc_acm 1-2.3:1.8: ttyACM4: USB ACM device
cdc_acm 1-2.3:1.10: This device cannot do calls on its own. It is not a modem.
cdc_acm 1-2.3:1.10: ttyACM5: USB ACM device
cdc_acm 1-2.3:1.12: This device cannot do calls on its own. It is not a modem.
cdc_acm 1-2.3:1.12: ttyACM6: USB ACM device
atmel_spi f0004000.spi: version: 0x212
atmel_spi f0004000.spi: Using dma1chan0 (tx) and dma1chan1 (rx) for DMA transfers
atmel_spi f0004000.spi: Atmel SPI Controller at 0xf0004000 (irq 29)
atmel_spi f0004000.spi: master is unqueued, this is deprecated
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
vizzini 2-3:1.0: This device cannot do calls on its own. It is not a modem.
vizzini 2-3:1.0: ttyXRUSB0: XR21v14x usb uart device
tmp102 0-0048: initialized
vizzini 2-3:1.2: This device cannot do calls on its own. It is not a modem.
vizzini 2-3:1.2: ttyXRUSB1: XR21v14x usb uart device
usbcore: registered new interface driver vizzini
vizzini: Exar USB UART Driver for XR21V141x 
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
usbserial: USB Serial support registered for generic
Starting Bootlog daemon: atmel_mci f0008000.mmc: version: 0x504
atmel_mci f0008000.mmc: using dma0chan3 for DMA transfers
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
atmel_mci f0008000.mmc: Atmel MCI controller at 0xf0008000 irq 22, 1 slots
atmel_usba_udc 500000.gadget: MMIO registers at 0xf803c000 mapped at d0f88000
atmel_usba_udc 500000.gadget: FIFO at 0x00500000 mapped at e1100000
pps pps0: new PPS source pps.7.-1
pps pps0: Registered IRQ 33 as PPS source
usbcore: registered new interface driver ftdi_sio
usbserial: USB Serial support registered for FTDI USB Serial Device
ftdi_sio 1-2.1:1.0: FTDI USB Serial Device converter detected
usb 1-2.1: Detected FT232H
usb 1-2.1: Number of endpoints 2
usb 1-2.1: Endpoint 1 MaxPacketSize 512
usb 1-2.1: Endpoint 2 MaxPacketSize 512
usb 1-2.1: Setting MaxPacketSize 512
usb 1-2.1: FTDI USB Serial Device converter now attached to ttyUSB0
bootlogd.

/var/config already mounted

/var/oem already mounted

Loading mts-io module

[INFO] mts-io:mts_io_init:829: init: v1.1.1
[INFO] mts-io:mts_id_eeprom_load:754: detected board MTCDT-0.0
[INFO] mts-io:mts_id_eeprom_load:757: sizeof: 512
[INFO] mts-io:mts_id_eeprom_load:758: vendor-id: Multi-Tech Systems
[INFO] mts-io:mts_id_eeprom_load:759: product-id: MTCDT-H5-210A
[INFO] mts-io:mts_id_eeprom_load:760: device-id: 18626542
[INFO] mts-io:mts_id_eeprom_load:761: hw-version: MTCDT-0.0
[INFO] mts-io:mts_id_eeprom_load:768: mac-addr: 00:08:00:4A:07:6F
[INFO] mts-io:mts_id_eeprom_load:770: imei: 356136071641528
[INFO] mts-io:mts_id_eeprom_load:771: capa-gps: no
[INFO] mts-io:mts_id_eeprom_load:772: capa-din: no
[INFO] mts-io:mts_id_eeprom_load:773: capa-dout: no
[INFO] mts-io:mts_id_eeprom_load:774: capa-adc: no
[INFO] mts-io:mts_id_eeprom_load:775: capa-wifi: no
[INFO] mts-io:mts_id_eeprom_load:776: capa-bluetooth: no
[INFO] mts-io:mts_id_eeprom_load:800: uuid: BE8D21A1DAD724BC3BDF0AED4D54690A
[INFO] mts-io:load_port:688: accessory card 1 vendor-id: Multi-Tech Systems
[INFO] mts-io:load_port:689: accessory card 1 product-id: MTAC-LORA-868
[INFO] mts-io:load_port:690: accessory card 1 device-id: 18637623
[INFO] mts-io:load_port:691: accessory card 1 hw-version: MTAC-LORA-1.0
[INFO] mts-io:load_port:712: accessory card 1 eui: 00:80:00:00:00:00:B6:A6
[INFO] mts-io:lora_setup:42: loading LORA accessory card in port 1
[INFO] mts-io:load_port:653: no accessory card inserted in port 2
net.ipv4.conf.default.rp_filter = 1

net.ipv4.conf.all.rp_filter = 1

INIT: Entering runlevel: 5

Configuring network interfaces... done.

Starting system message bus: dbus.

 INFO: LORIOT.io Gateway Version 1.0.1

macb f802c000.ethernet eth0: link up (100/Full)
 INFO: Acquired EUI 00-08-00-FF-FF-4A-07-6F from interface eth0

 INFO: Connecting to gateway configuration server ... 

  TLS: BIO_do_connect error - bad hostname lookup

ERROR: Couldn't retrieve gateway configuration. Retry in 4 seconds.

 INFO: Acquired EUI 00-08-00-FF-FF-4A-07-6F from interface eth0

 INFO: Connecting to gateway configuration server ... 

  TLS: BIO_do_connect error - bad hostname lookup

ERROR: Couldn't retrieve gateway configuration. Retry in 8 seconds.

 INFO: Acquired EUI 00-08-00-FF-FF-4A-07-6F from interface eth0

 INFO: Connecting to gateway configuration server ... 

  TLS: BIO_do_connect error - bad hostname lookup

ERROR: Couldn't retrieve gateway configuration. Retry in 16 seconds.

 INFO: Acquired EUI 00-08-00-FF-FF-4A-07-6F from interface eth0

 INFO: Connecting to gateway configuration server ... 

  TLS: BIO_do_connect error - bad hostname lookup

ERROR: Couldn't retrieve gateway configuration. Retry in 32 seconds.
    June 14, 2016 at 7:59 am #13163
    Jason Reiss
    Keymaster

    Are you able to ssh to the device or login from the USB device port on the back?

    June 14, 2016 at 8:18 am #13171
    Borja Iglesias
    Participant

    Impossible to ssh. It doesn´t connect.

    I didn´t never use the back USB port. I´ve just connect to them now, and it seems nothing occurs. PC doesn´t detect any device.

    I´m thinking about re-flashing but, for AEP model, the only way to flash device is trough internal web, and I can´t access it.

    I don´t know what to do…

    June 14, 2016 at 8:25 am #13174
    Jason Reiss
    Keymaster

    Please open a ticket at support.multitech.com and we will help you get it back in order.

    • This reply was modified 7 years, 11 months ago by Jason Reiss.
    June 14, 2016 at 8:49 am #13179
    Borja Iglesias
    Participant

    Thank you.

    I´ve just created a new case (#5071666).

    Thank you another time.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.