Hello

I have done everything from:

Getting Started with LoRa Conduit mLinux (LoRa Configuration)

to get connection from my mDot to Conduit. I have upgrading software of Conduit and mDot firmware and still can’t connect. I don’t know what I am doing wrong. My lora-network-server.conf looks like:
{
“db”: “/var/config/lora/lora-network-server.db”,
“backupInterval”: 21600, /* DB write interval (seconds) */
“lora”: {
“frequencyBand”: “868”, /* US=”915″, EU=”868″ */
“maxTxPower”: 14, /* Max Tx power (dBm), -6 to 26 */
“nodeQueueSize”: 16,
“nodeResetTime”: 10,
“nodeLostTime”: 600,
“frequencyEU”: 867500000, /* center freq for extra EU channels (Hz) */
“timeToPktFwd”: 100,
“netID”: “010203” /* netID for beacon packets */
},
“udp”: {
“upstreamPort”: 1780, /* ports for LoRa network communication */
“downstreamPort”: 1782,
“appPort”: 1784 /* port for user-developed application use */
},
“addressRange”: {
“start”: “00:00:00:01”, /* address range used for mDots */
“end”: “FF:FF:FF:FE”
},
“network”: {
“public”: false, /* set to false for private LoRa network with mDots + Conduit */
“leasetime”: 1440, /* time until mDot join expires (minutes) */
“name”: “myNetworkName”, /* configure network security */
“passphrase”: “myNetworkPassword”
},
“mqtt” : {
“enabled”: true, /* set to true to publish/subscribe to MQTT server for packets */
“host”: “127.0.0.1”,
“port”: 1883
},
“log” : {
“console” : true,
“syslog” : true,
“level” : 30, /* error=10, warn=20, info=30, debug=50, trace=60, max=100 */
“path”: “/var/log/lora-network-server.log”
}
}
Commands written to mDot was:
at+ni=1,myNetworkName
at+nk=1,myNetworkPassword
at&w
atz
at+join

The reultat is:
Joion error – Failed to join network
I have writen my own c++ programs on mDot in mbed. J haven’t join my network yet. There are nothing about connection in logs on Conduit. Help me solve the problem because I got stuck.