loraNetwork

Description: lora network interface settings : OBJECT (not available on MTR)

Element Type Description
__v UINT version of model [20] (automatic)
addressRange OBJECT address range settings
  end STRING end of range for assigned addresses, four groups of two hexadecimal digits, separated by colons
  start STRING start of range for assigned addresses, four groups of two hexadecimal digits, separated by colons
backupInterval    
db    
log OBJECT log settings
  console BOOL console
  level UINT log level
  path STRING path
  syslog BOOL syslog
lora OBJECT lora settings
  ADRStep UINT Step in cB between SNR based datarate assignment for ADR
  aesKey    
  antennaGain INT Gain of external antenna in dBi
  beaconFreqHop    
  beaconFrequency    
  beaconInfoDesc    
  beaconInterval    
  beaconLatitude    
  beaconLongitude    
  beaconPower    
  calAD9361    
  calTempRoom    
  channelMask    
  channelPlan    
  classCAckTimeout    
  deviceQueueSize UINT device queue size for pending downlink packets
  diversity    
  dspStatInterval    
  dutyCyclePeriod UINT Length of duty-cycle sliding window in minutes
  dwelltimeDown UINT max dwelltime for downlink packets default: 0 – no limit, 1 – 400 ms
  dwelltimeUp UINT max dwelltime for uplink packets, default: 0 – no limit, 1 – 400 ms
  enableStrictCounterValidation    
  enabled BOOL check to enable lora network support
  frequencyAS UINT center freq for extra AS channels (Hz)
  frequencyAS2    
  frequencyBand UINT frequency band
  frequencyBand2    
  frequencyEU UINT center freq for extra EU channels (Hz)
  frequencyEU2    
  frequencyIN    
  frequencyIN2    
  frequencyKR UINT center freq for extra KR channels (Hz)
  frequencyKR2    
  frequencyRU    
  frequencyRU2    
  frequencySubBand UINT frequency sub-band
  frequencySubBand2    
  fskSYNC    
  ftsMatchCRCError    
  ftsVersion    
  gpsReceiver    
  joinDelay UINT Rx1 delay in seconds between end of tx and opening of first rx window for join accept message
  lbtEnabled    
  maxDatarate UINT Max datarate for ADR
  maxEIRP UINT AS923 max device TX power
  maxTxPower UINT maximum tx power
  minDatarate UINT Min datarate for ADR
  nbDSP    
  netID STRING LoraWAN network ID : 3 bytes HEX
  networkLeadTime    
  packetForwarderConfig STRING contents to be used for global_conf.json file
  packetForwarderMode BOOL enable packet forwarder mode
  pingSlotDatarate    
  pingSlotFreqHop    
  pingSlotFrequency    
  reducedPacketUpdates    
  rx1DatarateOffset UINT offset used for datarate on first RX window
  rx1Delay UINT Rx1 delay in seconds between end of tx and opening of first rx window
  rx2Datarate UINT datarate to be used in second RX window
  skipPacketForwarderFieldCheck    
  spi_device    
mqtt OBJECT mqtt settings
  enabled BOOL check to enable MQTT protocol
  host STRING hostname
  password    
  port UINT port
  username    
network OBJECT network settings
  baseKey STRING Key used for zero touch provisioning : 16 bytes HEX
  defaultProfile    
  eui STRING extended unique identifier
  joinServer    
  key STRING key : 16 bytes HEX
  leasetime UINT lease time
  lensCheckinInterval    
  lensDeviceHQ    
  lensEnabled    
  lensGatewayStats    
  lensLocalJoinMetadata    
  lensNetworkStats    
  lensPacketData    
  lensPacketMetadata    
  lensServer    
  localJoinServerEnabled    
  name STRING name
  passphrase STRING passphrase
  public UINT set network mode 0:Private MTS, 1:Public LoRaWAN, 2:Private LoRaWAN
  salt STRING Salt used for zero touch provisioning
packetForwarder    
  aesKey    
  antennaGain    
  beaconFreqHop    
  beaconFrequency    
  beaconInfoDesc    
  beaconInterval    
  beaconLatitude    
  beaconLongitude    
  beaconPower    
  calAD9361    
  calTempRoom    
  channelPlan    
  diversity    
  downstreamPort    
  dspStatInterval    
  frequencyAS    
  frequencyAS2    
  frequencyEU    
  frequencyEU2    
  frequencyIN    
  frequencyIN2    
  frequencyKR    
  frequencyKR2    
  frequencyRU    
  frequencyRU2    
  frequencySubBand    
  frequencySubBand2    
  fskSYNC    
  ftsMatchCRCError    
  ftsVersion    
  fwdCrcDisabled    
  fwdCrcError    
  fwdCrcValid    
  gpsReceiver    
  gwID    
  gwID2    
  gwSource    
  keepAliveInterval    
  lbtDefaultChannels    
  lbtEnabled    
  lbtFrequency0    
  lbtFrequency1    
  lbtFrequency2    
  lbtFrequency3    
  lbtFrequency4    
  lbtFrequency5    
  lbtFrequency6    
  lbtFrequency7    
  lbtRssiOffset    
  lbtRssiTarget    
  lbtScanTime    
  manualMode    
  nbDSP    
  path    
  pathGeo    
  public    
  pushTimeout    
  serverAddress    
  statInterval    
  upstreamPort    
test    
  disableDutyCycle BOOL disable duty cycle. FOR TESTING PURPOSES ONLY!!!
  disableGPS    
  disableRxJoin1 BOOL disable join downlink packet in first Rx window
  disableRxJoin2 BOOL disable join downlink packet in second Rx window
  disableRxWindow1 BOOL disable downlink packet in first Rx window
  disableRxWindow2 BOOL disable downlink packet in second Rx window
trimInterval    
trimRows    
udp OBJECT udp settings
  allowPublic    
  appPortDown UINT application port down
  appPortUp UINT application port up
  downstreamPort UINT downstream port
  upstreamPort UINT upstream port
whitelist OBJECT white list settings
  devices ARRAY local unique appkey store
    appeui STRING application id attached to received packets : 8 bytes HEX
    appkey STRING device key used to authenticate join request and generate session keys : 16 bytes HEX
    class STRING operating class of end-device : A, B or C
    deveui STRING device id : 8 bytes HEX
  enabled BOOL check to provide an access to the devices from the White List only