Node-RED failing to load

Home › Forums › General › Node-RED failing to load

Tagged: 

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 23, 2018 at 5:19 pm #22680
    Sean O’Riordan
    Participant

    I attempted (and failed) to update the node-red package on the mtcdt-246a and during the process reinstalled node-red using opkg. The node-red interface now fails to load when I try to open it from the conduit user interface.
    Node-red is installed on the conduit according to opkg, any ideas as to why the interface fails to load? I’m sorry if this is a stupid question but I’m somewhat new to linux.

    February 23, 2018 at 5:26 pm #22681
    Jason Reiss
    Keymaster

    I suggest you go back to start.

    Download the aep upgrade file
    http://www.multitech.net/developer/downloads/

    Go to Admin > Firmware Upgrade

    This will reset the file system.

    February 23, 2018 at 5:52 pm #22682
    Sean O’Riordan
    Participant

    Thanks for the quick reply Jason! That worked, I’ll try to avoid messing with the nodeRED package again

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • The topic ‘Node-RED failing to load’ is closed to new replies.