APN on Modem Configuration

Home Forums General APN on Modem Configuration

This topic contains 3 replies, has 3 voices, and was last updated by  Damon Lora 6 months ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #26957

    Damon Lora
    Participant

    Good Day,

    Do any know how to set up APN on MTCDT-LVW2-247A, becasue APN isn’t on Modem Configuration?

    #26958

    Steve Kovarik
    Moderator

    Hello Damon

    In the vast majority of cases the Verizon APN is sent down over the air
    to the modem upon network registration. That is why there is not an APN field
    in the GUI of Verizon Conduit model MTCDT-LVW2-247A. In very rare cases where
    Verizon indicates a custom APN is required to be configured into modem, it can be done, and would be suggested to open a Support Portal case.

    -Best Regards

    #26960

    Lonny Knudson
    Moderator

    Hi Damon,
    For most Verizon data plans the APN is configured over the air when the SIM is first activated. If your plan requires you to set it manually, here are 2 methods:

    1. In the UI navigate to ‘Administration’ –> ‘Debug Options’, expand the radio terminal then enter the following command:
    AT+CGDCONT=3,”IPV4V6″,”[your apn]”

    2. Navigate to ‘Cewllular’ –> ‘Cellular Configuration’. In the ‘Modem Configuration’ section enter the following command in one of the Init String feilds:
    AT+CGDCONT=3,”IPV4V6″,”[your apn]”
    Click on ‘Submit’ then perform ‘Save and Restart’

    #26995

    Damon Lora
    Participant

    Dear Steve & Lonny,

    I think it should be LTE support band problem because my location’s LTE maybe use different LTE band with US.
    Thank you for your suggestion.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.