Daniel
Forum Replies Created
-
AuthorPosts
-
Daniel
ParticipantI added the configuration and the conduit now sets the SF from 7 to 12.
Is it also possible, to set a min tx power for ADR?
Daniel
ParticipantHello,
I have news.
In the webgui I set the min and max datarate to 0.
After resetting the clients, they were sending with SF12BW125.But after some messages, sent from the clients, the conduit set the DR5 (SF7) again. I can see this command in the logfile:
13:58:16:662|DEBUG| UDP message: lora/00-18-b2-00-00-00-05-69/up {"chan":6,"cls":0,"codr":"4/5","data":"AnQGZAAAAAAAAAAA","datr":"SF12BW125","freq":"869.7","lsnr":"11","mhd 13:58:16:663|DEBUG| UDP port: 1784 13:58:16:664|DEBUG| Mosquitto command received 'packet_recv' 13:58:16:739|DEBUG| Mosquitto command received 'up' 13:58:17:382|DEBUG| is frame ready? 13:58:17:382|DEBUG| App Queue Length: 0 13:58:17:383|DEBUG| ADR rxDR : 0 stDR : 5 avgSnr: 102 pwr: 14 13:58:17:383|DEBUG| BestGateway: 8000000000c2e6 13:58:17:384|DEBUG| Start 13:58:17:384|INFO| Frame transmitted to 00:00:00:01 via GW (00:80:00:00:00:00:c2:e6 Chan LC7 127.0.0.1:56906) Seq# 1 13:58:17:390|DEBUG| ADR rxDR : 0 stDR : 5 avgSnr: 102 pwr: 14 13:58:17:391|DEBUG| ADR update command: DR5 PWR: 14 13:58:17:391|DEBUG| ADR reducing txPower 13:58:17:392|DEBUG| ADR txpower: 11 index: 2 13:58:17:392|DEBUG| ADR node 00:00:00:01 setting DR5 13:58:17:393|DEBUG| App Data Queue: 0 front size: 38540 available: 237 13:58:17:393|DEBUG| Transmitted Frame data
and now?
Daniel
ParticipantI want DR0/SF12BW125 and so I set ADR min datarate and max datarate to 0.
But the conduit is not sending the adr command to the clients to set the SF12BW125. On the Adeunis RF Transmitter it is not possible to set the Datarate/SF direct on the device. This must set the conduit over adr commands.
Daniel
Participantthe two end devices are always sending with SF7. I want that they are sending with SF12
Daniel
Participantand how can I increase from SF7 to SF12?
-
AuthorPosts