RX1 & RX2 Frequenices
- This topic has 1 reply, 2 voices, and was last updated 7 years ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
Home › Forums › Conduit: AEP Model › RX1 & RX2 Frequenices
Tagged: Configuration File, RX2
Peter Ferland.
LesFrom:
http://www.multitech.net/developer/software/lora/introduction-to-lora/
US/AU Rx Frequencies
Private
Rx1 and Rx2:
Uplink Channel / 8
Public
Rx1:
Uplink Channel % 8
Rx2: 923.3
Is there an association between frequencies in the Conduit Configuration file and Downlink RX window frequencies? How does the Conduit understand what frequencies to use for RX windows, in particular the 923.3 MHz for RX2 when in public mode, since this is outside the range of frequencies described in the default configuration file?
Peter FerlandPer the LoRaWAN standard for US915 the 8 downlink channels are always 923.3-927.5 MHz. Uplink channels are divided into 64 channels ranging from 902.3 to 914.2MHz. The Conduit can listen on only 8 uplink channels at a time and the frequency band setting is selecting which 8 of those 64 to listen on. More details on the frequencies/channels for each region can be found in the “LoRaWAN Regional Parameters” document which can be freely downloaded from the lora alliance https://www.lora-alliance.org/For-Developers/LoRaWANDevelopers (free registration required)