Problems with connecting mDot to mLinux Conduit
- This topic has 2 replies, 2 voices, and was last updated 10 years ago by
.
Viewing 3 posts - 1 through 3 (of 3 total)
-
Hello,
After updating our mDot to firmware v. 0.1.2 we are no longer to able to
join our Conduits network. I have executed the following commands:at+fsb=5
at+ni=1,network name
at+nk=1,network password
at&w
atzI have repeated these steps multiple time. We have also ensured that we
are using the the correct fsb, network name, and password. Also, we are
currently using the mLinux version of the conduit and the current firmware
is 3.1.0. Please let me know if you have any suggestions on how to fix
this issue.Sincerely,
Robert Kronebusch
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.