Core CDP restarting issue

[Suhas Nangnurkar]

Hi,

I have MTCDP H5 GP with me & am trying to communicate with.

I am not getting stable connection via network. So I connected it using 3 pin serial console cable & TeraTerm on my PC, I observed that it gets restart after every 4-5 second, console shows Core CDP 2.2.2 rebooting message.

Can anybody help to solve this problem?

Thanks

Suhas

[Bryan Tran]

Hi Suhas,

1. Could you post the complete output of the reboot messages ?

2. Also, can you try to reload a precompiled image at the following site on your device and see if it helps.

https://webfiles.multitech.com/engineering/unofficial-releases/corecdp-2.2.2/

Regards,

BT

[Bryan Tran]

Hi Suhas,

Sorry I gave you a wrong link. Here is the correct link:

http://multitech.net/corecdp/images/

Regards,

BT

[Suhas Nangnurkar]

Hi Bryan,

Thanks for your reply & suggestion. I will try to load mentioned image meanwhile, following is the Log for your analysis.

============================================================

RomBOOT

*** AT91Bootstrap-2.13

NAND id:0x0000ECDA

> From: [0x00020000] To: [0x23F00000] Size: [0x00040000]

> SUCCESS

> Start: [0x23F00000]

U-Boot 1.3.4-mts (Sep 24 2012 – 18:33:19)

DRAM: 64 MB

NAND: 256 MiB

In: serial

Out: serial

Err: serial

Net: macb0

macb0: Starting autonegotiation…

macb0: Autonegotiation timed out (status=0x7849)

macb0: link down (status: 0x7849)

Hit any key to stop autoboot: 3 2 1 0

Loading from NAND 256MiB 3,3V 8-bit, offset 0xa0000

Image Name: CoreCDP/2.6.35/mtcdp

Image Type: ARM Linux Kernel Image (uncompressed)

Data Size: 1917052 Bytes = 1.8 MB

Load Address: 20008000

Entry Point: 20008000

## Booting kernel from Legacy Image at 21400000 …

Image Name: CoreCDP/2.6.35/mtcdp

Image Type: ARM Linux Kernel Image (uncompressed)

Data Size: 1917052 Bytes = 1.8 MB

Load Address: 20008000

Entry Point: 20008000

Verifying Checksum … OK

Loading Kernel Image … OK

OK

Starting kernel …

Uncompressing Linux… done, booting the kernel.

Linux version 2.6.35.14 (jjg@akbar) (gcc version 4.5.3 20110311 (prerelease) (GC

C) ) #1 PREEMPT Mon Sep 24 18:17:23 CDT 2012

CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177

CPU: VIVT data cache, VIVT instruction cache

Machine: Atmel AT91SAM9G20-EK

Memory policy: ECC disabled, Data cache writeback

Clocks: CPU 396 MHz, master 132 MHz, main 18.432 MHz

sam9g20: i2c available

Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256

Kernel command line: mem=64M console=ttyS0,115200 root=/dev/mtdblock8 ro rootfst

ype=jffs2

PID hash table entries: 256 (order: -2, 1024 bytes)

Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)

Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)

Memory: 64MB = 64MB total

Memory: 61076k/61076k available, 4460k reserved, 0K highmem

Virtual kernel memory layout:

vector : 0xffff0000 – 0xffff1000 ( 4 kB)

fixmap : 0xfff00000 – 0xfffe0000 ( 896 kB)

DMA : 0xffc00000 – 0xffe00000 ( 2 MB)

vmalloc : 0xc4800000 – 0xfee00000 ( 934 MB)

lowmem : 0xc0000000 – 0xc4000000 ( 64 MB)

modules : 0xbf000000 – 0xc0000000 ( 16 MB)

.init : 0xc0008000 – 0xc0028000 ( 128 kB)

.text : 0xc0028000 – 0xc0375000 (3380 kB)

.data : 0xc038e000 – 0xc03ab5a0 ( 118 kB)

Hierarchical RCU implementation.

RCU-based detection of stalled CPUs is disabled.

Verbose stalled-CPUs detection is disabled.

NR_IRQS:192

AT91: 96 gpio irqs in 3 banks

Console: colour dummy device 80×30

console [ttyS0] enabled

Calibrating delay loop… 197.83 BogoMIPS (lpj=989184)

pid_max: default: 32768 minimum: 301

Mount-cache hash table entries: 512

Initializing cgroup subsys blkio

CPU: Testing write buffer coherency: ok

devtmpfs: initialized

NET: Registered protocol family 16

AT91: Power Management (with slow clock mode)

AT91: Starting after power-restored wakeup

bio: create slab <bio-0> at 0

SCSI subsystem initialized

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

i2c-gpio i2c-gpio: using pins 55 (SDA) and 56 (SCL)

Switching to clocksource tcb_clksrc

NET: Registered protocol family 2

IP route cache hash table entries: 1024 (order: 0, 4096 bytes)

TCP established hash table entries: 2048 (order: 2, 16384 bytes)

TCP bind hash table entries: 2048 (order: 1, 8192 bytes)

TCP: Hash tables configured (established 2048 bind 2048)

TCP reno registered

UDP hash table entries: 256 (order: 0, 4096 bytes)

UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

NET: Registered protocol family 1

RPC: Registered udp transport module.

RPC: Registered tcp transport module.

RPC: Registered tcp NFSv4.1 backchannel transport module.

JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.

ROMFS MTD (C) 2007 Red Hat, Inc.

msgmni has been set to 119

Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)

io scheduler noop registered (default)

io scheduler deadline registered

io scheduler cfq registered

atmel_usart.0: ttyS0 at MMIO 0xfefff200 (irq = 1) is a ATMEL_SERIAL

atmel_usart.1: ttyS1 at MMIO 0xfffb0000 (irq = 6) is a ATMEL_SERIAL

atmel_usart.2: ttyS2 at MMIO 0xfffb4000 (irq = 7) is a ATMEL_SERIAL

atmel_usart.3: ttyS3 at MMIO 0xfffd0000 (irq = 23) is a ATMEL_SERIAL

brd: module loaded

loop: module loaded

at24 0-0056: 512 byte 24c04 EEPROM (writable)

sam9g20: read 512 bytes from id eeprom

NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bi

t)

Scanning device for bad blocks

Bad eraseblock 663 at 0x0000052e0000

Bad eraseblock 1172 at 0x000009280000

Creating 9 MTD partitions on “atmel_nand”:

0x000000000000-0x000010000000 : “MTNCG-NANDFlash”

0x000000000000-0x000000020000 : “AT91Bootstrap”

0x000000020000-0x000000060000 : “UBoot”

0x000000060000-0x000000080000 : “UBoot Config”

0x000000080000-0x0000000a0000 : “UBoot Redundant Config”

0x0000000a0000-0x000000800000 : “uImage”

0x000000800000-0x000001000000 : “Config”

0x000001000000-0x000001800000 : “Oem Config”

0x000001800000-0x000010000000 : “Rootfs”

atmel_spi atmel_spi.0: Atmel SPI Controller at 0xfffc8000 (irq 12)

atmel_spi atmel_spi.1: Atmel SPI Controller at 0xfffcc000 (irq 13)

PPP generic driver version 2.4.2

PPP Deflate Compression module registered

PPP BSD Compression module registered

MACB_mii_bus: probed

eth0: Atmel MACB at 0xfffc4000 irq 21 (00:08:00:87:9b:02)

eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=ffffffff:00, irq=-1)

usbmon: debugfs is not available

udc: at91_udc version 3 May 2006

mice: PS/2 mouse device common for all mice

rtc-at91sam9 at91_rtt.0: rtc core: registered at91_rtt as rtc0

i2c /dev entries driver

AT91SAM9 Watchdog: sorry, watchdog is disabled

at91_wdt: probe of at91_wdt failed with error -5

Netfilter messages via NETLINK v0.30.

nf_conntrack version 0.5.0 (954 buckets, 3816 max)

CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use

nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or

sysctl net.netfilter.nf_conntrack_acct=1 to enable it.

IPv4 over IPv4 tunneling driver

GRE over IPv4 tunneling driver

ip_tables: (C) 2000-2006 Netfilter Core Team

TCP cubic registered

NET: Registered protocol family 17

rtc-at91sam9 at91_rtt.0: setting system clock to 2012-11-25 18:03:43 UTC (135386

6623)

JFFS2 notice: (1) jffs2_build_xattr_subsystem: complete building xattr subsystem

, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.

VFS: Mounted root (jffs2 filesystem) readonly on device 31:8.

devtmpfs: mounted

Freeing init memory: 128K

INIT: version 2.86 booting

Please wait: booting…

Starting udev

ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver

at91_ohci at91_ohci: AT91 OHCI

at91_ohci at91_ohci: new USB bus registered, assigned bus number 1

at91_ohci at91_ohci: irq 20, io mem 0x00500000

usb usb1: New USB device found, idVendor=1d6b, idProduct=0001

usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

mmc0: new SDHC card at address e624

mmcblk0: mmc0:e624 SU04G 3.69 GiB

mmcblk0: p1

usb usb1: Product: AT91 OHCI

usb usb1: Manufacturer: Linux 2.6.35.14 ohci_hcd

usb usb1: SerialNumber: at91

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 2 ports detected

udevd-work[49]: kernel-provided name ‘usbdev1.1’ and NAME= ‘bus/usb/001/001’ dis

agree, please use SYMLINK+= or change the kernel to provide the proper name

usb 1-1: new full speed USB device using at91_ohci and address 2

usb 1-1: New USB device found, idVendor=1bc7, idProduct=0021

usb 1-1: New USB device strings: Mfr=18, Product=19, SerialNumber=20

usb 1-1: Product: Telit Wireless Module

usb 1-1: Manufacturer: Telit wireless solutions

usb 1-1: SerialNumber: 351579050058377

udevd-work[71]: kernel-provided name ‘usbdev1.2’ and NAME= ‘bus/usb/001/002’ dis

agree, please use SYMLINK+= or change the kernel to provide the proper name

cdc_acm 1-1:1.0: This device cannot do calls on its own. It is not a modem.

cdc_acm 1-1:1.0: ttyACM0: USB ACM device

cdc_acm 1-1:1.2: This device cannot do calls on its own. It is not a modem.

cdc_acm 1-1:1.2: ttyACM1: USB ACM device

cdc_acm 1-1:1.4: This device cannot do calls on its own. It is not a modem.

cdc_acm 1-1:1.4: ttyACM2: USB ACM device

cdc_acm 1-1:1.6: This device cannot do calls on its own. It is not a modem.

cdc_acm 1-1:1.6: ttyACM3: USB ACM device

cdc_acm 1-1:1.8: This device cannot do calls on its own. It is not a modem.

cdc_acm 1-1:1.8: ttyACM4: USB ACM device

cdc_acm 1-1:1.10: This device cannot do calls on its own. It is not a modem.

cdc_acm 1-1:1.10: ttyACM5: USB ACM device

cdc_acm 1-1:1.12: This device cannot do calls on its own. It is not a modem.

cdc_acm 1-1:1.12: ttyACM6: USB ACM device

usbcore: registered new interface driver cdc_acm

cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapter

s

Remounting root file system…

Caching udev devnodes

Mounting /var/config

JFFS2 notice: (249) jffs2_build_xattr_subsystem: complete building xattr subsyst

em, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.

Configuring network interfaces… udhcpc (v1.18.3) started

Sending discover…

Sending discover…

Sending discover…

No lease, failing

done.

net.ipv4.conf.default.rp_filter = 1

net.ipv4.conf.all.rp_filter = 1

Loading mts-io module

[INFO] mts-io:mts_io_init:2438: init: v0.5.1

[INFO] mts-io:mts_id_eeprom_load:403: sizeof: 512

[INFO] mts-io:mts_id_eeprom_load:404: vendor-id: Multi-Tech Systems

[INFO] mts-io:mts_id_eeprom_load:405: product-id: MTCDP-H5-GP

[INFO] mts-io:mts_id_eeprom_load:406: device-id: 16357056

[INFO] mts-io:mts_id_eeprom_load:407: hw-version: MTCDP-1.0

[INFO] mts-io:mts_id_eeprom_load:414: mac-addr: 00:08:00:87:9B:02

[INFO] mts-io:mts_id_eeprom_load:415: imei: 351579050058377

[INFO] mts-io:mts_id_eeprom_load:416: capa-gps: yes

[INFO] mts-io:mts_id_eeprom_load:417: capa-din: yes

[INFO] mts-io:mts_id_eeprom_load:418: capa-dout: yes

[INFO] mts-io:mts_id_eeprom_load:419: capa-adc: yes

INIT: Entering runlevel: 5

Starting Dropbear SSH server: dropbear.

Starting Vixie-cron.

Starting syslogd/klogd: done

Loading [g_serial]

g_serial gadget: Gadget Serial v2.4

g_serial gadget: g_serial ready

Starting Lighttpd Web Server: lighttpd.

Starting daemon…

_____ _____ _____ _____

/ ____| / ____| __ | __

| | ___ _ __ ___| | | | | | |__) |

| | / _ | ‘__/ _ | | | | | ___/

| |____| (_) | | | __/ |____| |__| | |

_____|___/|_| ___|_____|_____/|_|

Multi-Tech Systems CoreCDP Distribution mtcdp ttyS0

CoreCDP 2.2.2 mtcdp ttyS0

mtcdp login: INIT: Switchin to INIT: Sending processes Stopping Dropbear SSH server: stopped /usr/sbin/dropbear

(pid 364)

dropbear.

Stopping Vixie-cron.

Deconfiguring network interfaces… done.

Stopping Lighttpd Web Server: stopped /usr/sbin/lighttpd (pid 402)

lighttpd.

Stopping syslogd/klogd: stopped syslogd (pid 370)

stopped klogd (pid 372)

done

Sending all processes the TERM signal…

Sending all processes the KILL signal…

Unmounting remote filesystems…

Deactivating swap…

Unmounting local filesystems…

umount2: Device or resource busy

umount: none busy – remounted read-only

umount2: Device or resource busy

umount: devtmpfs busy – remounted read-only

Rebooting… Restarting system.

RomBOOT

*** AT91Bootstrap-2.13

NAND id:0x0000ECDA

> From: [0x00020000] To: [0x23F00000] Size: [0x00040000]

> SUCCESS

> Start: [0x23F00000]

U-Boot 1.3.4-mts (Sep 24 2012 – 18:33:19)

DRAM: 64 MB

NAND: 256 MiB

In: serial

Out: serial

Err: serial

Net: macb0

macb0: Starting autonegotiation…

macb0: Autonegotiation timed out (status=0x7849)

macb0: link down (status: 0x7849)

Hit any key to stop autoboot: 3 2 1 0

Loading from NAND 256MiB 3,3V 8-bit, offset 0xa0000

Image Name: CoreCDP/2.6.35/mtcdp

Image Type: ARM Linux Kernel Image (uncompressed)

Data Size: 1917052 Bytes = 1.8 MB

Load Address: 20008000

Entry Point: 20008000

## Booting kernel from Legacy Image at 21400000 …

Image Name: CoreCDP/2.6.35/mtcdp

Image Type: ARM Linux Kernel Image (uncompressed)

Data Size: 1917052 Bytes = 1.8 MB

Load Address: 20008000

Entry Point: 20008000

Verifying Checksum … OK

Loading Kernel Image … OK

OK

Starting kernel …

Uncompressing Linux… done, booting the kernel.

Linux version 2.6.35.14 (jjg@akbar) (gcc version 4.5.3 20110311 (prerelease) (GC

C) ) #1 PREEMPT Mon Sep 24 18:17:23 CDT 2012

CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177

CPU: VIVT data cache, VIVT instruction cache

Machine: Atmel AT91SAM9G20-EK

Memory policy: ECC disabled, Data cache writeback

Clocks: CPU 396 MHz, master 132 MHz, main 18.432 MHz

sam9g20: i2c available

Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256

Kernel command line: mem=64M console=ttyS0,115200 root=/dev/mtdblock8 ro rootfst

ype=jffs2

PID hash table entries: 256 (order: -2, 1024 bytes)

Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)

Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)

Memory: 64MB = 64MB total

Memory: 61076k/61076k available, 4460k reserved, 0K highmem

Virtual kernel memory layout:

vector : 0xffff0000 – 0xffff1000 ( 4 kB)

fixmap : 0xfff00000 – 0xfffe0000 ( 896 kB)

DMA : 0xffc00000 – 0xffe00000 ( 2 MB)

vmalloc : 0xc4800000 – 0xfee00000 ( 934 MB)

lowmem : 0xc0000000 – 0xc4000000 ( 64 MB)

modules : 0xbf000000 – 0xc0000000 ( 16 MB)

.init : 0xc0008000 – 0xc0028000 ( 128 kB)

.text : 0xc0028000 – 0xc0375000 (3380 kB)

.data : 0xc038e000 – 0xc03ab5a0 ( 118 kB)

Hierarchical RCU implementation.

RCU-based detection of stalled CPUs is disabled.

Verbose stalled-CPUs detection is disabled.

NR_IRQS:192

AT91: 96 gpio irqs in 3 banks

Console: colour dummy device 80×30

console [ttyS0] enabled

Calibrating delay loop… 197.83 BogoMIPS (lpj=989184)

pid_max: default: 32768 minimum: 301

Mount-cache hash table entries: 512

Initializing cgroup subsys blkio

CPU: Testing write buffer coherency: ok

devtmpfs: initialized

NET: Registered protocol family 16

AT91: Power Management (with slow clock mode)

AT91: Starting after software reset

bio: create slab <bio-0> at 0

SCSI subsystem initialized

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

i2c-gpio i2c-gpio: using pins 55 (SDA) and 56 (SCL)

Switching to clocksource tcb_clksrc

NET: Registered protocol family 2

IP route cache hash table entries: 1024 (order: 0, 4096 bytes)

TCP established hash table entries: 2048 (order: 2, 16384 bytes)

TCP bind hash table entries: 2048 (order: 1, 8192 bytes)

TCP: Hash tables configured (established 2048 bind 2048)

TCP reno registered

UDP hash table entries: 256 (order: 0, 4096 bytes)

UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

NET: Registered protocol family 1

RPC: Registered udp transport module.

RPC: Registered tcp transport module.

RPC: Registered tcp NFSv4.1 backchannel transport module.

JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.

ROMFS MTD (C) 2007 Red Hat, Inc.

msgmni has been set to 119

Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)

io scheduler noop registered (default)

io scheduler deadline registered

io scheduler cfq registered

atmel_usart.0: ttyS0 at MMIO 0xfefff200 (irq = 1) is a ATMEL_SERIAL

atmel_usart.1: ttyS1 at MMIO 0xfffb0000 (irq = 6) is a ATMEL_SERIAL

atmel_usart.2: ttyS2 at MMIO 0xfffb4000 (irq = 7) is a ATMEL_SERIAL

atmel_usart.3: ttyS3 at MMIO 0xfffd0000 (irq = 23) is a ATMEL_SERIAL

brd: module loaded

loop: module loaded

at24 0-0056: 512 byte 24c04 EEPROM (writable)

sam9g20: read 512 bytes from id eeprom

NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bi

t)

Scanning device for bad blocks

Bad eraseblock 663 at 0x0000052e0000

Bad eraseblock 1172 at 0x000009280000

Creating 9 MTD partitions on “atmel_nand”:

0x000000000000-0x000010000000 : “MTNCG-NANDFlash”

0x000000000000-0x000000020000 : “AT91Bootstrap”

0x000000020000-0x000000060000 : “UBoot”

0x000000060000-0x000000080000 : “UBoot Config”

0x000000080000-0x0000000a0000 : “UBoot Redundant Config”

0x0000000a0000-0x000000800000 : “uImage”

0x000000800000-0x000001000000 : “Config”

0x000001000000-0x000001800000 : “Oem Config”

0x000001800000-0x000010000000 : “Rootfs”

atmel_spi atmel_spi.0: Atmel SPI Controller at 0xfffc8000 (irq 12)

atmel_spi atmel_spi.1: Atmel SPI Controller at 0xfffcc000 (irq 13)

PPP generic driver version 2.4.2

PPP Deflate Compression module registered

PPP BSD Compression module registered

MACB_mii_bus: probed

eth0: Atmel MACB at 0xfffc4000 irq 21 (00:08:00:87:9b:02)

eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=ffffffff:00, irq=-1)

usbmon: debugfs is not available

udc: at91_udc version 3 May 2006

mice: PS/2 mouse device common for all mice

rtc-at91sam9 at91_rtt.0: rtc core: registered at91_rtt as rtc0

i2c /dev entries driver

AT91SAM9 Watchdog: sorry, watchdog is disabled

at91_wdt: probe of at91_wdt failed with error -5

Netfilter messages via NETLINK v0.30.

nf_conntrack version 0.5.0 (954 buckets, 3816 max)

CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use

nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or

sysctl net.netfilter.nf_conntrack_acct=1 to enable it.

IPv4 over IPv4 tunneling driver

GRE over IPv4 tunneling driver

ip_tables: (C) 2000-2006 Netfilter Core Team

TCP cubic registered

NET: Registered protocol family 17

rtc-at91sam9 at91_rtt.0: setting system clock to 2012-11-25 18:05:03 UTC (135386

6703)

JFFS2 notice: (1) jffs2_build_xattr_subsystem: complete building xattr subsystem

, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.

VFS: Mounted root (jffs2 filesystem) readonly on device 31:8.

devtmpfs: mounted

Freeing init memory: 128K

INIT: version 2.86 booting

Please wait: booting…

Starting udev

mmc0: new SDHC card at address e624

mmcblk0: mmc0:e624 SU04G 3.69 GiB

mmcblk0: p1

ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver

at91_ohci at91_ohci: AT91 OHCI

at91_ohci at91_ohci: new USB bus registered, assigned bus number 1

at91_ohci at91_ohci: irq 20, io mem 0x00500000

usb usb1: New USB device found, idVendor=1d6b, idProduct=0001

usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

usb usb1: Product: AT91 OHCI

usb usb1: Manufacturer: Linux 2.6.35.14 ohci_hcd

usb usb1: SerialNumber: at91

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 2 ports detected

udevd-work[49]: kernel-provided name ‘usbdev1.1’ and NAME= ‘bus/usb/001/001’ dis

agree, please use SYMLINK+= or change the kernel to provide the proper name

usb 1-1: new full speed USB device using at91_ohci and address 2

usb 1-1: New USB device found, idVendor=1bc7, idProduct=0021

usb 1-1: New USB device strings: Mfr=18, Product=19, SerialNumber=20

usb 1-1: Product: Telit Wireless Module

usb 1-1: Manufacturer: Telit wireless solutions

usb 1-1: SerialNumber: 351579050058377

udevd-work[70]: kernel-provided name ‘usbdev1.2’ and NAME= ‘bus/usb/001/002’ dis

agree, please use SYMLINK+= or change the kernel to provide the proper name

cdc_acm 1-1:1.0: This device cannot do calls on its own. It is not a modem.

cdc_acm 1-1:1.0: ttyACM0: USB ACM device

cdc_acm 1-1:1.2: This device cannot do calls on its own. It is not a modem.

cdc_acm 1-1:1.2: ttyACM1: USB ACM device

cdc_acm 1-1:1.4: This device cannot do calls on its own. It is not a modem.

cdc_acm 1-1:1.4: ttyACM2: USB ACM device

cdc_acm 1-1:1.6: This device cannot do calls on its own. It is not a modem.

cdc_acm 1-1:1.6: ttyACM3: USB ACM device

cdc_acm 1-1:1.8: This device cannot do calls on its own. It is not a modem.

cdc_acm 1-1:1.8: ttyACM4: USB ACM device

cdc_acm 1-1:1.10: This device cannot do calls on its own. It is not a modem.

cdc_acm 1-1:1.10: ttyACM5: USB ACM device

cdc_acm 1-1:1.12: This device cannot do calls on its own. It is not a modem.

cdc_acm 1-1:1.12: ttyACM6: USB ACM device

usbcore: registered new interface driver cdc_acm

cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapter

s

Remounting root file system…

Caching udev devnodes

Mounting /var/config

JFFS2 notice: (251) jffs2_build_xattr_subsystem: complete building xattr subsyst

em, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.

Configuring network interfaces… udhcpc (v1.18.3) started

Sending discover…

Sending discover…

Sending discover…

No lease, failing

done.

net.ipv4.conf.default.rp_filter = 1

net.ipv4.conf.all.rp_filter = 1

Loading mts-io module

[INFO] mts-io:mts_io_init:2438: init: v0.5.1

[INFO] mts-io:mts_id_eeprom_load:403: sizeof: 512

[INFO] mts-io:mts_id_eeprom_load:404: vendor-id: Multi-Tech Systems

[INFO] mts-io:mts_id_eeprom_load:405: product-id: MTCDP-H5-GP

[INFO] mts-io:mts_id_eeprom_load:406: device-id: 16357056

[INFO] mts-io:mts_id_eeprom_load:407: hw-version: MTCDP-1.0

[INFO] mts-io:mts_id_eeprom_load:414: mac-addr: 00:08:00:87:9B:02

[INFO] mts-io:mts_id_eeprom_load:415: imei: 351579050058377

[INFO] mts-io:mts_id_eeprom_load:416: capa-gps: yes

[INFO] mts-io:mts_id_eeprom_load:417: capa-din: yes

[INFO] mts-io:mts_id_eeprom_load:418: capa-dout: yes

[INFO] mts-io:mts_id_eeprom_load:419: capa-adc: yes

INIT: Entering runlevel: 5

Starting Dropbear SSH server: dropbear.

Starting Vixie-cron.

Starting syslogd/klogd: done

Loading [g_serial]

g_serial gadget: Gadget Serial v2.4

g_serial gadget: g_serial ready

Starting Lighttpd Web Server: lighttpd.

Starting daemon…

_____ _____ _____ _____

/ ____| / ____| __ | __

| | ___ _ __ ___| | | | | | |__) |

| | / _ | ‘__/ _ | | | | | ___/

| |____| (_) | | | __/ |____| |__| | |

_____|___/|_| ___|_____|_____/|_|

Multi-Tech Systems CoreCDP Distribution mtcdp ttyS0

CoreCDP 2.2.2 mtcdp ttyS0

mtcdp login: JFFS2 warning: (413) jffs2_sum_write_data: Not enough space for sum

mary, padsize = -537

INIT: Switching to runlevel:INIT: Sending processes Stopping Dropbear SSH server: stopped /usr/sbin/dropbear

(pid 369)

dropbear.

Stopping Vixie-cron.

Deconfiguring network interfaces… done.

Stopping Lighttpd Web Server: stopped /usr/sbin/lighttpd (pid 407)

lighttpd.

Stopping syslogd/klogd: stopped syslogd (pid 375)

stopped klogd (pid 377)

done

Sending all processes the TERM signal…

Sending all processes the KILL signal…

Unmounting remote filesystems…

Deactivating swap…

Unmounting local filesystems…

umount2: Device or resource busy

umount: none busy – remounted read-only

umount2: Device or resource busy

umount: devtmpfs busy – remounted read-only

Rebooting… Restarting system.

RomBOOT

*** AT91Bootstrap-2.13

NAND id:0x0000ECDA

> From: [0x00020000] To: [0x23F00000] Size: [0x00040000]

> SUCCESS

> Start: [0x23F00000]

U-Boot 1.3.4-mts (Sep 24 2012 – 18:33:19)

DRAM: 64 MB

NAND: 256 MiB

In: serial

Out: serial

Err: serial

Net: macb0

macb0: Starting autonegotiation…

macb0: Autonegotiation timed out (status=0x7849)

macb0: link down (status: 0x7849)

Hit any key to stop autoboot: 3 2 1 0

Loading from NAND 256MiB 3,3V 8-bit, offset 0xa0000

Image Name: CoreCDP/2.6.35/mtcdp

Image Type: ARM Linux Kernel Image (uncompressed)

Data Size: 1917052 Bytes = 1.8 MB

Load Address: 20008000

Entry Point: 20008000

## Booting kernel from Legacy Image at 21400000 …

Image Name: CoreCDP/2.6.35/mtcdp

Image Type: ARM Linux Kernel Image (uncompressed)

Data Size: 1917052 Bytes = 1.8 MB

Load Address: 20008000

Entry Point: 20008000

Verifying Checksum … OK

Loading Kernel Image … OK

OK

Starting kernel …

Uncompressing Linux… done, booting the kernel.

Linux version 2.6.35.14 (jjg@akbar) (gcc version 4.5.3 20110311 (prerelease) (GC

C) ) #1 PREEMPT Mon Sep 24 18:17:23 CDT 2012

CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177

CPU: VIVT data cache, VIVT instruction cache

Machine: Atmel AT91SAM9G20-EK

Memory policy: ECC disabled, Data cache writeback

Clocks: CPU 396 MHz, master 132 MHz, main 18.432 MHz

sam9g20: i2c available

Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256

Kernel command line: mem=64M console=ttyS0,115200 root=/dev/mtdblock8 ro rootfst

ype=jffs2

PID hash table entries: 256 (order: -2, 1024 bytes)

Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)

Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)

Memory: 64MB = 64MB total

Memory: 61076k/61076k available, 4460k reserved, 0K highmem

Virtual kernel memory layout:

vector : 0xffff0000 – 0xffff1000 ( 4 kB)

fixmap : 0xfff00000 – 0xfffe0000 ( 896 kB)

DMA : 0xffc00000 – 0xffe00000 ( 2 MB)

vmalloc : 0xc4800000 – 0xfee00000 ( 934 MB)

lowmem : 0xc0000000 – 0xc4000000 ( 64 MB)

modules : 0xbf000000 – 0xc0000000 ( 16 MB)

.init : 0xc0008000 – 0xc0028000 ( 128 kB)

.text : 0xc0028000 – 0xc0375000 (3380 kB)

.data : 0xc038e000 – 0xc03ab5a0 ( 118 kB)

Hierarchical RCU implementation.

RCU-based detection of stalled CPUs is disabled.

Verbose stalled-CPUs detection is disabled.

NR_IRQS:192

AT91: 96 gpio irqs in 3 banks

Console: colour dummy device 80×30

console [ttyS0] enabled

Calibrating delay loop… 197.83 BogoMIPS (lpj=989184)

pid_max: default: 32768 minimum: 301

Mount-cache hash table entries: 512

Initializing cgroup subsys blkio

CPU: Testing write buffer coherency: ok

devtmpfs: initialized

NET: Registered protocol family 16

AT91: Power Management (with slow clock mode)

AT91: Starting after software reset

bio: create slab <bio-0> at 0

SCSI subsystem initialized

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

i2c-gpio i2c-gpio: using pins 55 (SDA) and 56 (SCL)

Switching to clocksource tcb_clksrc

NET: Registered protocol family 2

IP route cache hash table entries: 1024 (order: 0, 4096 bytes)

TCP established hash table entries: 2048 (order: 2, 16384 bytes)

TCP bind hash table entries: 2048 (order: 1, 8192 bytes)

TCP: Hash tables configured (established 2048 bind 2048)

TCP reno registered

UDP hash table entries: 256 (order: 0, 4096 bytes)

UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

NET: Registered protocol family 1

RPC: Registered udp transport module.

RPC: Registered tcp transport module.

RPC: Registered tcp NFSv4.1 backchannel transport module.

JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.

ROMFS MTD (C) 2007 Red Hat, Inc.

msgmni has been set to 119

Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)

io scheduler noop registered (default)

io scheduler deadline registered

io scheduler cfq registered

atmel_usart.0: ttyS0 at MMIO 0xfefff200 (irq = 1) is a ATMEL_SERIAL

atmel_usart.1: ttyS1 at MMIO 0xfffb0000 (irq = 6) is a ATMEL_SERIAL

atmel_usart.2: ttyS2 at MMIO 0xfffb4000 (irq = 7) is a ATMEL_SERIAL

atmel_usart.3: ttyS3 at MMIO 0xfffd0000 (irq = 23) is a ATMEL_SERIAL

brd: module loaded

loop: module loaded

at24 0-0056: 512 byte 24c04 EEPROM (writable)

sam9g20: read 512 bytes from id eeprom

NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bi

t)

Scanning device for bad blocks

Bad eraseblock 663 at 0x0000052e0000

Bad eraseblock 1172 at 0x000009280000

Creating 9 MTD partitions on “atmel_nand”:

0x000000000000-0x000010000000 : “MTNCG-NANDFlash”

0x000000000000-0x000000020000 : “AT91Bootstrap”

0x000000020000-0x000000060000 : “UBoot”

0x000000060000-0x000000080000 : “UBoot Config”

0x000000080000-0x0000000a0000 : “UBoot Redundant Config”

0x0000000a0000-0x000000800000 : “uImage”

0x000000800000-0x000001000000 : “Config”

0x000001000000-0x000001800000 : “Oem Config”

0x000001800000-0x000010000000 : “Rootfs”

atmel_spi atmel_spi.0: Atmel SPI Controller at 0xfffc8000 (irq 12)

atmel_spi atmel_spi.1: Atmel SPI Controller at 0xfffcc000 (irq 13)

PPP generic driver version 2.4.2

PPP Deflate Compression module registered

PPP BSD Compression module registered

MACB_mii_bus: probed

eth0: Atmel MACB at 0xfffc4000 irq 21 (00:08:00:87:9b:02)

eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=ffffffff:00, irq=-1)

usbmon: debugfs is not available

udc: at91_udc version 3 May 2006

mice: PS/2 mouse device common for all mice

rtc-at91sam9 at91_rtt.0: rtc core: registered at91_rtt as rtc0

i2c /dev entries driver

AT91SAM9 Watchdog: sorry, watchdog is disabled

at91_wdt: probe of at91_wdt failed with error -5

Netfilter messages via NETLINK v0.30.

nf_conntrack version 0.5.0 (954 buckets, 3816 max)

CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use

nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or

sysctl net.netfilter.nf_conntrack_acct=1 to enable it.

IPv4 over IPv4 tunneling driver

GRE over IPv4 tunneling driver

ip_tables: (C) 2000-2006 Netfilter Core Team

TCP cubic registered

NET: Registered protocol family 17

rtc-at91sam9 at91_rtt.0: setting system clock to 2012-11-25 18:06:22 UTC (135386

6782)

JFFS2 notice: (1) jffs2_build_xattr_subsystem: complete building xattr subsystem

, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.

VFS: Mounted root (jffs2 filesystem) readonly on device 31:8.

devtmpfs: mounted

Freeing init memory: 128K

INIT: version 2.86 booting

Please wait: booting…

Starting udev

mmc0: new SDHC card at address e624

mmcblk0: mmc0:e624 SU04G 3.69 GiB

mmcblk0: p1

ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver

at91_ohci at91_ohci: AT91 OHCI

at91_ohci at91_ohci: new USB bus registered, assigned bus number 1

at91_ohci at91_ohci: irq 20, io mem 0x00500000

usb usb1: New USB device found, idVendor=1d6b, idProduct=0001

usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

usb usb1: Product: AT91 OHCI

usb usb1: Manufacturer: Linux 2.6.35.14 ohci_hcd

usb usb1: SerialNumber: at91

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 2 ports detected

udevd-work[49]: kernel-provided name ‘usbdev1.1’ and NAME= ‘bus/usb/001/001’ dis

agree, please use SYMLINK+= or change the kernel to provide the proper name

usb 1-1: new full speed USB device using at91_ohci and address 2

usb 1-1: New USB device found, idVendor=1bc7, idProduct=0021

usb 1-1: New USB device strings: Mfr=18, Product=19, SerialNumber=20

usb 1-1: Product: Telit Wireless Module

usb 1-1: Manufacturer: Telit wireless solutions

usb 1-1: SerialNumber: 351579050058377

udevd-work[71]: kernel-provided name ‘usbdev1.2’ and NAME= ‘bus/usb/001/002’ dis

agree, please use SYMLINK+= or change the kernel to provide the proper name

cdc_acm 1-1:1.0: This device cannot do calls on its own. It is not a modem.

cdc_acm 1-1:1.0: ttyACM0: USB ACM device

cdc_acm 1-1:1.2: This device cannot do calls on its own. It is not a modem.

cdc_acm 1-1:1.2: ttyACM1: USB ACM device

cdc_acm 1-1:1.4: This device cannot do calls on its own. It is not a modem.

cdc_acm 1-1:1.4: ttyACM2: USB ACM device

cdc_acm 1-1:1.6: This device cannot do calls on its own. It is not a modem.

cdc_acm 1-1:1.6: ttyACM3: USB ACM device

cdc_acm 1-1:1.8: This device cannot do calls on its own. It is not a modem.

cdc_acm 1-1:1.8: ttyACM4: USB ACM device

cdc_acm 1-1:1.10: This device cannot do calls on its own. It is not a modem.

cdc_acm 1-1:1.10: ttyACM5: USB ACM device

cdc_acm 1-1:1.12: This device cannot do calls on its own. It is not a modem.

cdc_acm 1-1:1.12: ttyACM6: USB ACM device

usbcore: registered new interface driver cdc_acm

cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapter

s

Remounting root file system…

Caching udev devnodes

Mounting /var/config

JFFS2 notice: (244) jffs2_build_xattr_subsystem: complete building xattr subsyst

em, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.

Configuring network interfaces… udhcpc (v1.18.3) started

Sending discover…

Sending discover…

Sending discover…

No lease, failing

done.

net.ipv4.conf.default.rp_filter = 1

net.ipv4.conf.all.rp_filter = 1

Loading mts-io module

[INFO] mts-io:mts_io_init:2438: init: v0.5.1

[INFO] mts-io:mts_id_eeprom_load:403: sizeof: 512

[INFO] mts-io:mts_id_eeprom_load:404: vendor-id: Multi-Tech Systems

[INFO] mts-io:mts_id_eeprom_load:405: product-id: MTCDP-H5-GP

[INFO] mts-io:mts_id_eeprom_load:406: device-id: 16357056

[INFO] mts-io:mts_id_eeprom_load:407: hw-version: MTCDP-1.0

[INFO] mts-io:mts_id_eeprom_load:414: mac-addr: 00:08:00:87:9B:02

[INFO] mts-io:mts_id_eeprom_load:415: imei: 351579050058377

[INFO] mts-io:mts_id_eeprom_load:416: capa-gps: yes

[INFO] mts-io:mts_id_eeprom_load:417: capa-din: yes

[INFO] mts-io:mts_id_eeprom_load:418: capa-dout: yes

[INFO] mts-io:mts_id_eeprom_load:419: capa-adc: yes

INIT: Entering runlevel: 5

Starting Dropbear SSH server: dropbear.

Starting Vixie-cron.

Starting syslogd/klogd: done

Loading [g_serial]

g_serial gadget: Gadget Serial v2.4

g_serial gadget: g_serial ready

Starting Lighttpd Web Server: lighttpd.

Starting daemon…

_____ _____ _____ _____

/ ____| / ____| __ | __

| | ___ _ __ ___| | | | | | |__) |

| | / _ | ‘__/ _ | | | | | ___/

| |____| (_) | | | __/ |____| |__| | |

_____|___/|_| ___|_____|_____/|_|

Multi-Tech Systems CoreCDP Distribution mtcdp ttyS0

CoreCDP 2.2.2 mtcdp ttyS0

mtcdp login: INIT: Switching to rnlevINIT: Sending processes Stopping Dropbear SSH server: stopped /usr/sbin/dropbear

(pid 359)

dropbear.

Stopping Vixie-cron.

Deconfiguring network interfaces… done.

Stopping Lighttpd Web Server: stopped /usr/sbin/lighttpd (pid 398)

lighttpd.

Stopping syslogd/klogd: stopped syslogd (pid 365)

stopped klogd (pid 367)

done

Sending all processes the TERM signal…

Sending all processes the KILL signal…

Unmounting remote filesystems…

Deactivating swap…

Unmounting local filesystems…

umount2: Device or resource busy

umount: none busy – remounted read-only

umount2: Device or resource busy

umount: devtmpfs busy – remounted read-only

Rebooting… Restarting system.

RomBOOT

*** AT91Bootstrap-2.13

NAND id:0x0000ECDA

> From: [0x00020000] To: [0x23F00000] Size: [0x00040000]

> SUCCESS

> Start: [0x23F00000]

U-Boot 1.3.4-mts (Sep 24 2012 – 18:33:19)

DRAM: 64 MB

NAND: 256 MiB

In: serial

Out: serial

Err: serial

Net: macb0

macb0: Starting autonegotiation…

macb0: Autonegotiation timed out (status=0x7849)

macb0: link down (status: 0x7849)

Hit any key to stop autoboot: 3 2 1 0

Loading from NAND 256MiB 3,3V 8-bit, offset 0xa0000

Image Name: CoreCDP/2.6.35/mtcdp

Image Type: ARM Linux Kernel Image (uncompressed)

Data Size: 1917052 Bytes = 1.8 MB

Load Address: 20008000

Entry Point: 20008000

## Booting kernel from Legacy Image at 21400000 …

Image Name: CoreCDP/2.6.35/mtcdp

Image Type: ARM Linux Kernel Image (uncompressed)

Data Size: 1917052 Bytes = 1.8 MB

Load Address: 20008000

Entry Point: 20008000

Verifying Checksum … OK

Loading Kernel Image … OK

OK

Starting kernel …

Uncompressing Linux… done, booting the kernel.

Linux version 2.6.35.14 (jjg@akbar) (gcc version 4.5.3 20110311 (prerelease) (GC

C) ) #1 PREEMPT Mon Sep 24 18:17:23 CDT 2012

CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177

CPU: VIVT data cache, VIVT instruction cache

Machine: Atmel AT91SAM9G20-EK

Memory policy: ECC disabled, Data cache writeback

Clocks: CPU 396 MHz, master 132 MHz, main 18.432 MHz

sam9g20: i2c available

Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256

Kernel command line: mem=64M console=ttyS0,115200 root=/dev/mtdblock8 ro rootfst

ype=jffs2

PID hash table entries: 256 (order: -2, 1024 bytes)

Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)

Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)

Memory: 64MB = 64MB total

Memory: 61076k/61076k available, 4460k reserved, 0K highmem

Virtual kernel memory layout:

vector : 0xffff0000 – 0xffff1000 ( 4 kB)

fixmap : 0xfff00000 – 0xfffe0000 ( 896 kB)

DMA : 0xffc00000 – 0xffe00000 ( 2 MB)

vmalloc : 0xc4800000 – 0xfee00000 ( 934 MB)

lowmem : 0xc0000000 – 0xc4000000 ( 64 MB)

modules : 0xbf000000 – 0xc0000000 ( 16 MB)

.init : 0xc0008000 – 0xc0028000 ( 128 kB)

.text : 0xc0028000 – 0xc0375000 (3380 kB)

.data : 0xc038e000 – 0xc03ab5a0 ( 118 kB)

Hierarchical RCU implementation.

RCU-based detection of stalled CPUs is disabled.

Verbose stalled-CPUs detection is disabled.

NR_IRQS:192

AT91: 96 gpio irqs in 3 banks

Console: colour dummy device 80×30

console [ttyS0] enabled

Calibrating delay loop… 197.83 BogoMIPS (lpj=989184)

pid_max: default: 32768 minimum: 301

Mount-cache hash table entries: 512

Initializing cgroup subsys blkio

CPU: Testing write buffer coherency: ok

devtmpfs: initialized

NET: Registered protocol family 16

AT91: Power Management (with slow clock mode)

AT91: Starting after software reset

bio: create slab <bio-0> at 0

SCSI subsystem initialized

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

i2c-gpio i2c-gpio: using pins 55 (SDA) and 56 (SCL)

Switching to clocksource tcb_clksrc

NET: Registered protocol family 2

IP route cache hash table entries: 1024 (order: 0, 4096 bytes)

TCP established hash table entries: 2048 (order: 2, 16384 bytes)

TCP bind hash table entries: 2048 (order: 1, 8192 bytes)

TCP: Hash tables configured (established 2048 bind 2048)

TCP reno registered

UDP hash table entries: 256 (order: 0, 4096 bytes)

UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)

NET: Registered protocol family 1

RPC: Registered udp transport module.

RPC: Registered tcp transport module.

RPC: Registered tcp NFSv4.1 backchannel transport module.

JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.

ROMFS MTD (C) 2007 Red Hat, Inc.

msgmni has been set to 119

Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)

io scheduler noop registered (default)

io scheduler deadline registered

io scheduler cfq registered

atmel_usart.0: ttyS0 at MMIO 0xfefff200 (irq = 1) is a ATMEL_SERIAL

atmel_usart.1: ttyS1 at MMIO 0xfffb0000 (irq = 6) is a ATMEL_SERIAL

atmel_usart.2: ttyS2 at MMIO 0xfffb4000 (irq = 7) is a ATMEL_SERIAL

atmel_usart.3: ttyS3 at MMIO 0xfffd0000 (irq = 23) is a ATMEL_SERIAL

brd: module loaded

loop: module loaded

at24 0-0056: 512 byte 24c04 EEPROM (writable)

sam9g20: read 512 bytes from id eeprom

NAND device: Manufacturer ID: 0xec, Chip ID: 0xda (Samsung NAND 256MiB 3,3V 8-bi

t)

Scanning device for bad blocks

Bad eraseblock 663 at 0x0000052e0000

Bad eraseblock 1172 at 0x000009280000

Creating 9 MTD partitions on “atmel_nand”:

0x000000000000-0x000010000000 : “MTNCG-NANDFlash”

0x000000000000-0x000000020000 : “AT91Bootstrap”

0x000000020000-0x000000060000 : “UBoot”

0x000000060000-0x000000080000 : “UBoot Config”

0x000000080000-0x0000000a0000 : “UBoot Redundant Config”

0x0000000a0000-0x000000800000 : “uImage”

0x000000800000-0x000001000000 : “Config”

0x000001000000-0x000001800000 : “Oem Config”

0x000001800000-0x000010000000 : “Rootfs”

atmel_spi atmel_spi.0: Atmel SPI Controller at 0xfffc8000 (irq 12)

atmel_spi atmel_spi.1: Atmel SPI Controller at 0xfffcc000 (irq 13)

PPP generic driver version 2.4.2

PPP Deflate Compression module registered

PPP BSD Compression module registered

MACB_mii_bus: probed

eth0: Atmel MACB at 0xfffc4000 irq 21 (00:08:00:87:9b:02)

eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=ffffffff:00, irq=-1)

usbmon: debugfs is not available

udc: at91_udc version 3 May 2006

mice: PS/2 mouse device common for all mice

rtc-at91sam9 at91_rtt.0: rtc core: registered at91_rtt as rtc0

i2c /dev entries driver

AT91SAM9 Watchdog: sorry, watchdog is disabled

at91_wdt: probe of at91_wdt failed with error -5

Netfilter messages via NETLINK v0.30.

nf_conntrack version 0.5.0 (954 buckets, 3816 max)

CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use

nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or

sysctl net.netfilter.nf_conntrack_acct=1 to enable it.

IPv4 over IPv4 tunneling driver

GRE over IPv4 tunneling driver

ip_tables: (C) 2000-2006 Netfilter Core Team

TCP cubic registered

NET: Registered protocol family 17

rtc-at91sam9 at91_rtt.0: setting system clock to 2012-11-25 18:07:42 UTC (135386

6862)

JFFS2 notice: (1) jffs2_build_xattr_subsystem: complete building xattr subsystem

, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.

VFS: Mounted root (jffs2 filesystem) readonly on device 31:8.

devtmpfs: mounted

Freeing init memory: 128K

INIT: version 2.86 booting

Please wait: booting…

Starting udev

mmc0: new SDHC card at address e624

mmcblk0: mmc0:e624 SU04G 3.69 GiB

mmcblk0: p1

ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver

at91_ohci at91_ohci: AT91 OHCI

at91_ohci at91_ohci: new USB bus registered, assigned bus number 1

at91_ohci at91_ohci: irq 20, io mem 0x00500000

usb usb1: New USB device found, idVendor=1d6b, idProduct=0001

usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

usb usb1: Product: AT91 OHCI

usb usb1: Manufacturer: Linux 2.6.35.14 ohci_hcd

usb usb1: SerialNumber: at91

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 2 ports detected

udevd-work[49]: kernel-provided name ‘usbdev1.1’ and NAME= ‘bus/usb/001/001’ dis

agree, please use SYMLINK+= or change the kernel to provide the proper name

usb 1-1: new full speed USB device using at91_ohci and address 2

usb 1-1: New USB device found, idVendor=1bc7, idProduct=0021

usb 1-1: New USB device strings: Mfr=18, Product=19, SerialNumber=20

usb 1-1: Product: Telit Wireless Module

usb 1-1: Manufacturer: Telit wireless solutions

usb 1-1: SerialNumber: 351579050058377

udevd-work[71]: kernel-provided name ‘usbdev1.2’ and NAME= ‘bus/usb/001/002’ dis

agree, please use SYMLINK+= or change the kernel to provide the proper name

cdc_acm 1-1:1.0: This device cannot do calls on its own. It is not a modem.

cdc_acm 1-1:1.0: ttyACM0: USB ACM device

cdc_acm 1-1:1.2: This device cannot do calls on its own. It is not a modem.

cdc_acm 1-1:1.2: ttyACM1: USB ACM device

cdc_acm 1-1:1.4: This device cannot do calls on its own. It is not a modem.

cdc_acm 1-1:1.4: ttyACM2: USB ACM device

cdc_acm 1-1:1.6: This device cannot do calls on its own. It is not a modem.

cdc_acm 1-1:1.6: ttyACM3: USB ACM device

cdc_acm 1-1:1.8: This device cannot do calls on its own. It is not a modem.

cdc_acm 1-1:1.8: ttyACM4: USB ACM device

cdc_acm 1-1:1.10: This device cannot do calls on its own. It is not a modem.

cdc_acm 1-1:1.10: ttyACM5: USB ACM device

cdc_acm 1-1:1.12: This device cannot do calls on its own. It is not a modem.

cdc_acm 1-1:1.12: ttyACM6: USB ACM device

usbcore: registered new interface driver cdc_acm

cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapter

s

Remounting root file system…

Caching udev devnodes

Mounting /var/config

JFFS2 notice: (251) jffs2_build_xattr_subsystem: complete building xattr subsyst

em, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.

Configuring network interfaces… udhcpc (v1.18.3) started

Sending discover…

Sending discover…

Sending discover…

============================================================

Thanks & Regards,

Suhas

[Bryan Tran]

Hi Suhas,

The log looks fine. However, after the complete boot up where it shows the last line is:

‘Starting daemon…’

I am not sure what daemon, it is starting. I looked at my device boot up messages with original factory default, I did not have that line. (Using same version corecdp-2.2.2)

I was wondering, did you add/modify anything with the source code, recompile and upload that image to the device and it is causing this problem ?

Regards,

BT

[Author]

Posts