loranetwork

Description : LoRa network interface settings : OBJECT

Element Type Description
udp OBJECT udp settings
    appPortUp UINT application port up
    downstreamPort UINT downstream port
    appPortDown UINT application port down
    upstreamPort UINT upstream port
network OBJECT network settings
    key STRING key : 16 bytes HEX
    leasetime UINT lease time
    name STRING name
    baseKey STRING Key used for zero touch provisioning : 16 bytes HEX
    passphrase STRING passphrase
    eui STRING extended unique identifier
    salt STRING Salt used for zero touch provisioning
    public BOOL enable to make the LoRa network public
whitelist OBJECT white list settings
    enabled BOOL check to provide an access to the devices from the White List only
    devices ARRAY device extended unique identifier
addressRange OBJECT address range settings
    start STRING start of range for assigned addresses, four groups of two hexadecimal digits, separated by colons
    end STRING end of range for assigned addresses, four groups of two hexadecimal digits, separated by colons
mqtt OBJECT mqtt settings
    enabled BOOL check to enable MQTT protocol
    host STRING hostname
    port UINT port
test
    disableRxWindow2 BOOL disable downlink packet in second Rx window
    disableDutyCycle BOOL disable duty cycle. FOR TESTING PURPOSES ONLY!!!
    disableRxWindow1 BOOL disable downlink packet in first Rx window
    disableRxJoin1 BOOL disable join downlink packet in first Rx window
    disableRxJoin2 BOOL disable join downlink packet in second Rx window
lora OBJECT lora settings
    frequencyBand UINT frequency band
    rx2Datarate UINT datarate to be used in second RX window
    antennaGain INT Gain of external antenna in dBi
    frequencyKR UINT center freq for extra KR channels (Hz)
    frequencySubBand UINT frequency sub-band
    dwelltimeUp UINT max dwelltime for uplink packets, default: 0 – no limit, 1 – 400 ms
    netID STRING LoraWAN network ID : 3 bytes HEX
    dutyCyclePeriod UINT Length of duty-cycle sliding window in minutes
    packetForwarderConfig STRING contents to be used for global_conf.json file
    frequencyAS UINT center freq for extra AS channels (Hz)
    joinDelay UINT Rx1 delay in seconds between end of tx and opening of first rx window for join accept message
    maxDatarate UINT Max datarate for ADR
    rx1Delay UINT Rx1 delay in seconds between end of tx and opening of first rx window
    minDatarate UINT Min datarate for ADR
    nodeQueueSize UINT node queue size
    maxEIRP UINT AS923 max device TX power
    maxTxPower UINT maximum tx power
    rx1DatarateOffset UINT offset used for datarate on first RX window
    packetForwarderMode BOOL enable packet forwarder mode
    dwelltimeDown UINT max dwelltime for downlink packets default: 0 – no limit, 1 – 400 ms
    enabled BOOL check to enable lora network support
    ADRStep UINT Step in cB between SNR based datarate assignment for ADR
    frequencyEU UINT center freq for extra EU channels (Hz)
log OBJECT log settings
    console BOOL console
    path STRING path
    level UINT log level
    syslog BOOL syslog