mlinux problem
- This topic has 3 replies, 2 voices, and was last updated 6 years, 3 months ago by
.
Viewing 4 posts - 1 through 4 (of 4 total)
Viewing 4 posts - 1 through 4 (of 4 total)
- You must be logged in to reply to this topic.
Home › Forums › Conduit: mLinux Model › mlinux problem
John Klug.
Antonio FernandezHello, community:
I have placed a service in the folder /etc/init.d and when I start the operating system, the system does not run, therefore, this service blocks the system and does not load the prompt.
the conduit does not run ssh and ftp services.
what can I do??
best regards
John KlugYou can use u-boot to re-flash the firmware:
Antonio FernandezFirst of all, thank you very much John Klug.
When performing the steps described above, you only install the mLinux operating system. It does not install the web management and services of lora-network-server.
How can I restore the conduit to the first state, please?
That is to say, that conduit has Web management, and Lora-network-server controler, Is there an installation manual?
Thank you very much.
Best regard.
John KlugYou must get AEP images from customer support. They are not publicly available. Only mLinux images are available, which have no GUI. mLinux requires editing files to configure Lora-Network-Server, etc.