Conduit AEP Firewall
- This topic has 1 reply, 2 voices, and was last updated 6 years, 5 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
Home › Forums › Conduit: AEP Model › Conduit AEP Firewall
Alexandros Rapsomanikis.
John TolsonHi
We have deployed our Conduit AEP but need to add some firewall rules for management access. My worry is losing access to the device with an incorrect rule so was wondering if there is any sort of rollback system with the firewall configuration as I do not fancy having to recover the device from the mast on which it is mounted.
Thanks
Alexandros RapsomanikisHello,
you can connect to your gateway via serial interface, which means that even if you’re blocked outside, you can reverse or edit the rules.
Additionally, you can connect via SSH, test your iptable rules by typing them in and if anything goes wrong, just restart the device. The rules you type in manually aren’t saved on restart.
To permanently store your iptable rules, set them via the Web Interface. Login and navigate to Firewall > Settings. There you can add your custom Firewall rules, which will be saved on reboot.
Best regards.