AT+RSSI and peer to peer

Home › Forums › mDot/xDot › AT+RSSI and peer to peer

Tagged: 

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 12, 2020 at 5:45 pm #31235
    richt@rothenbuhlereng.com
    Participant

    Is it possible to get the signal strength when sending packets in a peer to peer network using AT commands (AT+RSSI)?

    October 13, 2020 at 6:52 am #31236
    Jason Reiss
    Keymaster

    AT+RSSI is the preferred method to retrieve RSSI of the last received packet using Dot AT Firmware. It will work in LoRaWAN and P2P modes.

    October 13, 2020 at 10:02 am #31237
    richt@rothenbuhlereng.com
    Participant

    Yes, I was able to confirm in p2p. Works great!

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.