Perico

Forum Replies Created

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • November 13, 2020 at 5:38 am in reply to: Conduit for Industrial Automation: modbus, EthernetIP, OPC-UA #31332
    Perico
    Participant

    Hi Eric and Lawrence,

    First of all and unknowing all the rules of the forum I open again this converssation to ask about the topic of it, cause it’s abput what I need information and maybe both participants now has a better vision of it.

    I’m working in a similar project than Eric and now I’m looking for information about the best way to send the data of my gateway to a SCADA. As you say I think that there’s only the possibility of Modbus TCP to be sure that it couldn’t cause problems, because it’s a installed node at the gateway Node-Red.

    Do you have more information about this or any recomendation?

    Thank you,
    Roger.

    August 18, 2020 at 2:23 am in reply to: Import the received data of my gateway. #31094
    Perico
    Participant

    Dear Jason,
    My problem was that I put wrong the commands:
    $ lora-query -x packet list json
    $ lora-query -x packet up json

    Now I’ve seen that the data that appears with this comands is not instantaneously,somebody knows the actualization period time? Neverthless it’s usefull for me but now I need to see the data at real time, I’m going to try it with node-red, saving the instantaneous data in a file.

    • This reply was modified 3 years, 8 months ago by Perico.
    August 14, 2020 at 10:16 am in reply to: Import the received data of my gateway. #31085
    Perico
    Participant

    About your first question I used the lora-query json comand and it doesn’t works, first I think that with this I can get the data, but it seems to be wrong. This folliwing the webpage: http://www.multitech.net/developer/software/lora/lora-network-server/

    I can’t answer your last question, honestly I’m a bit lost in all of this. For the moment I’m working on your proposal with MQTT.

    Thanks Jason.

    • This reply was modified 3 years, 8 months ago by Perico.
    August 14, 2020 at 5:20 am in reply to: Import the received data of my gateway. #31082
    Perico
    Participant

    I’ll take a look on it but my intention is to do it simpler, I thought I only need to be able to have acces in the database archive and with this I can export the data.

    August 14, 2020 at 2:23 am in reply to: Connect sensor after a reset #31080
    Perico
    Participant

    I use version 5.2.1

    August 13, 2020 at 2:46 am in reply to: Connect sensor after a reset #31072
    Perico
    Participant

    Hi Jason,
    Yes my device is connected via ABP but my intention is not have to restart my connections if a power outage or similar happens in the sensor or in the gateway.

    I’m looking to disable Strict Counter as you say, but i can’t find the setting.

    Thank’s.

    July 16, 2020 at 10:20 am in reply to: Launch Node red App #30961
    Perico
    Participant

    Thanks Steve, problem solved.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)