Loïc Baret

Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • in reply to: mDot "No enabled channel" #19556
    Loïc Baret
    Participant

    The Txpower was +20dBm before and after (I and my colleague put the maximum), but since the reset we didn’t touch it, +11dBm.

    Edit :
    We tried Jason’s configuration and it works but we still have this question :
    Why it was working with txf = 0 and txp = 20 ?

    • This reply was modified 7 years, 10 months ago by Loïc Baret.
    in reply to: mDot "No enabled channel" #19553
    Loïc Baret
    Participant

    I just remember that I only touched transmitter power, or antenna gain.
    I have an EU868 mDot, and now I have 8 channels, with the correct mask (00FF). I don’t touch any configuration since the reset.
    I agree with you about the duty cycle regulation but before the problem I could send 20+ messages without a high delay … So I don’t understand what it happened.

    Thanks,
    Loïc

Viewing 2 posts - 1 through 2 (of 2 total)