MultiTech Developer Resources » Topic: Will Conduit work with third party end nodes like Feather RFM9x LoRa module

Will Conduit work with third party end nodes like Feather RFM9x LoRa module

Tagged: Feather RFM9x, Third party end nodes

This topic has 2 replies, 2 voices, and was last updated 6 years, 6 months ago by Vinesh Hanumantharayappa.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
October 9, 2017 at 4:19 am #21131
Vinesh Hanumantharayappa
Participant
Hello,

I want to set up a system where the Multitech’s Conduit (AEP) should establish a communication with a Feather RFM9x LoRa module. Will Conduit work with third party end nodes of LoRa other than mdot/ xDot ?
- This topic was modified 6 years, 7 months ago by Vinesh Hanumantharayappa.
October 13, 2017 at 2:54 am #21165

Davy De Waele
Participant

The Conduit AEP can work with third party Lora modules that support ABP or OTA. However I’m not sure if the RFM9x comes with a LoRaWAN stack. So you should look into that.

See more info here on how to set up external LoraWan modules with ABP or OTA :

– http://www.multitech.net/developer/software/lora/lora-network-server/
– http://www.multitech.net/developer/software/lora/conduit-aep-lora-communication/aep-lora-use-third-party-devices/

October 13, 2017 at 3:01 am #21166

Vinesh Hanumantharayappa
Participant

The Feather M0 LoRa module doesn’t have a LoRaWAN stack. But, I found a LMIC library for the Arduino environment available in this link :

https://github.com/matthijskooijman/arduino-lmic

This library provides OTA for The Things Network (TTN). Nowhere they have mentioned how to connect to a Conduit Gateway. I am really confused as I am new to all these.It will be very helpful if you can guide me in this.
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.