Multitech conduit AEP Model : Does not work after power restart

Home › Forums › Conduit: AEP Model › Multitech conduit AEP Model : Does not work after power restart

Tagged: , , ,

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • March 2, 2017 at 7:55 am #17623
    Kamran Alam
    Participant

    Hi All,

    I am using Multi-connect Conduit AEP Model and have connected it to loriot successfully. But, whenever there is a power restart of the conduit, then it does not connect to loriot server automatically. To connect it again, i have to do a SSH into gateway and push the configurations again.

    Please suggest a solution so that the gateway automatically connects to loriot server whenever power comes up.

    Regards
    Kamran
    kamran.alam@iotrek.in

    March 3, 2017 at 10:34 am #17654
    Peter Ferland
    Blocked

    On an AEP conduit, anything that can be set in the web interface or through device HQ must be set through those methods or else your changes will be overwritten on next reboot. If its just the network settings that keep changing, this is likely your problem.

    You can set various device parameters from the commandline or a script on an AEP conduit using the REST api and curl. More details on the API is here: http://www.multitech.net/developer/software/mtr-api-reference/

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.