Join response time

Home › Forums › Conduit: AEP Model › Join response time

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 9, 2016 at 7:26 am #15406
    Jean-Noel Durand
    Participant

    Hi,

    I understand that in PUBLIC mode the response time is 5s and in PRIVATE mode it is 1s but is it possible to change this delay ?
    Because I have LoRa sensors that need 5s delay in both modes ..

    Thanks

    November 9, 2016 at 9:43 am #15415
    Jason Reiss
    Keymaster

    Private mode on mDot and Conduit has a difference in downlink frequencies that are not LoraWAN compatible.

    http://www.multitech.net/developer/software/lora/introduction-to-lora/

    There is not a configuration to do this. But a work around is possible.
    Configure the network server for Public mode and start the packet forwarder manually with the Private Sync word 0x12 (18 in json)

    November 15, 2016 at 9:30 am #15462
    Jean-Noel Durand
    Participant

    Ok, thanks !

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.