Display informations on Conduit

[Benoit DALLEMAGNE]

Hello,
I’m currently working with a MTDOT-BOX-G-868 and a MultiConnect Conduit. I would like to display informations, GPS informations firstly, but when i’m sending a frame from the node to the conduit, the only thing I receive is looking like this : lora/00-80-00-00-00-00-c7-bc/packet_recv {“chan”:4,”codr”:”4/5″,”data”:”QAEAAAYAAgABaP//SolB/b9oDawSmRFhSrVL”,”datr”:”SF7BW125″,”freq”:867.29999999999995,”lsnr”:-4,”modu”:”LORA”,”rfch”:1,”rssi”:-108,”size”:27,”stat”:1,”time”:”2017-04-10T13:21:59.987954Z”,”tmst”:197183515}
lora/00-80-00-00-00-00-c7-bc/up {“chan”:4,”cls”:0,”codr”:”4/5″,”data”:”Dv0ADwgF8eMFVpwLAkE=”,”datr”:”SF7BW125″,”freq”:”867.3″,”lsnr”:”-4″,”mhdr”:”4001000006000200″,”modu”:”LORA”,”opts”:””,”port”:1,”rfch”:1,”rssi”:-108,”seqn”:2,”size”:20,”timestamp”:”2017-04-10T13:21:59.987954Z”,”tmst”:197183515}

I would like to display informations that i can read, but they are crypted, and i don’t know how to display them proprely for I can read it, can you help me ?

Regards

[Peter Ferland]

The data packet format is described on this page: http://www.multitech.net/developer/software/dot-box-and-evb-software/data-packet-format/

Make sure to select “Bytes” in the settings for the LoRa input node before parsing msg.data.

[Author]

Posts