Change frequency band on xDot
- This topic has 1 reply, 2 voices, and was last updated 8 years ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
Is it possible to change the frequency band of an xDot module away from the factory set band? Specifically I have a NA band xDot that I would like to flash as an AU
Scott,
We don’t normally allow customers to change the Dot’s factory configuration.
However, our 3.0 release of the Dot Libraries allows you to compile in the channel plan you’d like to use, regardless of the frequency band the Dot was configured for. Please note that this is for development only and devices **should not** be deployed this way. We’ve released development builds of 3.0 and the production builds will be out soon.
https://developer.mbed.org/teams/MultiTech/code/libmDot-dev-mbed5/
https://developer.mbed.org/teams/MultiTech/code/libxDot-dev-mbed5/
Cheers!
-Mike