yousefbaiji@gmail.comi followed the troubleshooting guide but am still unable to join ,i have the non cellular conduit i set up the network as WAN as the guide said ,im connecting the conduit to my laptop using ethernet connection ,my laptop has wifi connection ,i put the sub frequency as one,change the network id and the passphrase .then i connected my mdot with udk and used tera term to configure it i followed every procedure still i cant join . i updated my conduit firmware to 1.4.17 and i used serial to upgrade mdot firmware to 3.0.0 and i redid all the procedures still cant join .btw i got to lora antennas with the starter kit i attached one on the lora Conduit and the other one directly on the mdot , im just giving you all the details maybe im doing something wrong.appreciate your help
