John Beattie

Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • in reply to: Using Loriot software on an AEP Conduit? #11754
    John Beattie
    Participant

    In fact

    /etc/init.d/lora-network-server stop

    did the trick.

    Best regards, John

    in reply to: lora-in node on Node-Red #11566
    John Beattie
    Participant

    Hi Andrew,

    A WiMOD device, running LoRaWAN software.

    The conduit recognises the join request and puts the device into its db.

    Communications between the device and the conduit are flakey but packets are recognised by the conduit, see the next answer.

    The status page shows this:

    Received
    CRC Errors 2351
    Duplicates 0
    Join Duplicates 0
    Join Requests 73
    Total Packets 79

    Sent
    Duplicates Acked 6
    Packets Acked 0
    Total Join Responses 73
    Join Responses Dropped 0
    Total Packets 79
    Packets Dropped 0

    Node Address EUI Join Time RSSI (avg) SNR (avg) Pkts Up Pkts Down Details
    00:00:00:01 07:06:05:04:03:02:01:00 2016-02-05 13:13:31 0 0 0 2

    The CRC errors and the duplicates show what I mean by flakey 🙂 but a few packets have been seen, in addition to the join requests.

    I was wondering where the Node-Red took its data from – is it from the packet forwarder or is it from the network server directly or is it something else.

    Best regards,
    John

Viewing 2 posts - 1 through 2 (of 2 total)