Antonio Gonzalez

Forum Replies Created

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • in reply to: Activate GPS on MTCDT-LEU1-246A #23139
    Antonio Gonzalez
    Participant

    please, no answer?

    in reply to: Activate GPS on MTCDT-LEU1-246A #22877
    Antonio Gonzalez
    Participant

    When you solve this issue?
    I buy for a gateway with GPS, but not working for firmware issue.

    Antonio

    in reply to: Send data to IOT Hub Azure #21523
    Antonio Gonzalez
    Participant

    I tried, but not working…
    I installed the nodes from the team of azure, but not appear in Node-RED after installed (I re-boot the gateway, but nothing)…

    in reply to: Activate GPS on MTCDT-LEU1-246A #21522
    Antonio Gonzalez
    Participant

    Yes, I follow… no results….

    in reply to: Send data to IOT Hub Azure #21191
    Antonio Gonzalez
    Participant

    Please…

    in reply to: Send data to IOT Hub Azure #21178
    Antonio Gonzalez
    Participant

    Hi Jason,
    I installed the version of node-red in im pc and I can connect perfectly.

    The issue, is the seeting are different to setup MQTT connection between the 0.17.5 ver installed in my pc and the ver of the conduict.

    The only difference is the flag “Enable secure(SSL/TLS) connection” is available in the ver 0.17.5.

    How I can solve?

    Please, your support……

    in reply to: Send data to IOT Hub Azure #21153
    Antonio Gonzalez
    Participant

    Please…. I need support….

    in reply to: Send data to IOT Hub Azure #21018
    Antonio Gonzalez
    Participant

    Hi Jason,
    Yes I tried to follow the guide, but not working.
    also I follow this:
    http://www.multitech.net/developer/forums/topic/trouble-adding-new-node-to-node-red-to-connect-to-azure-iot-hub/

    but unsuccessfully…

    please, any idea to install the azure node?
    when I tried, I receive the following warnings and errors:

    admin@mtcdt:~# npm install -g node-red-contrib-azure-iot-hub
    npm WARN deprecated crypto@0.0.3: This package is no longer supported. It’s now a built-in Node module. If you’ve depended on crypto, you should switch to the o ne that’s built-in.
    npm WARN deprecated node-uuid@1.4.8: Use uuid module instead
    npm WARN engine request@2.81.0: wanted: {“node”:”>= 4″} (current: {“node”:”0.10. 40″,”npm”:”1.4.28″})
    npm WARN engine hash-base@3.0.4: wanted: {“node”:”>=4″} (current: {“node”:”0.10. 40″,”npm”:”1.4.28″})
    npm WARN engine form-data@2.1.4: wanted: {“node”:”>= 0.12″} (current: {“node”:”0 .10.40″,”npm”:”1.4.28″})
    npm WARN engine har-validator@4.2.1: wanted: {“node”:”>=4″} (current: {“node”:”0 .10.40″,”npm”:”1.4.28″})
    npm WARN engine har-schema@1.0.5: wanted: {“node”:”>=4″} (current: {“node”:”0.10 .40″,”npm”:”1.4.28″})
    npm WARN engine co@4.6.0: wanted: {“iojs”:”>= 1.0.0″,”node”:”>= 0.12.0″} (curren t: {“node”:”0.10.40″,”npm”:”1.4.28″})
    npm ERR! EEXIST, open ‘/home/root/.npm/f005543e-eadable-stream-2-3-3-package-tgz .lock’
    File exists: /home/root/.npm/f005543e-eadable-stream-2-3-3-package-tgz.lock
    Move it away, and try again.

    npm ERR! System Linux 3.12.27r13
    npm ERR! command “node” “/usr/bin/npm” “install” “-g” “node-red-contrib-azure-io t-hub”
    npm ERR! cwd /home/root
    npm ERR! node -v v0.10.40
    npm ERR! npm -v 1.4.28
    npm ERR! path /home/root/.npm/f005543e-eadable-stream-2-3-3-package-tgz.lock
    npm ERR! code EEXIST
    npm ERR! errno 47
    npm ERR! not ok code 0

Viewing 8 posts - 1 through 8 (of 8 total)