[Antonio Fernandez]

First of all, thank you very much John Klug.

When performing the steps described above, you only install the mLinux operating system. It does not install the web management and services of lora-network-server.

How can I restore the conduit to the first state, please?
That is to say, that conduit has Web management, and Lora-network-server controler, Is there an installation manual?

Thank you very much.
Best regard.

[Antonio Fernandez]

Hello Jason,

thank you for your answer.

However, we don’t get to decrypt the whole byte sequence. With your link, we transform “VPokJSksT4jBM/w4N1I=” into “54FA2425292C4F88C133FC383752”, which turns into 28 hex digits, as expected from http://www.multitech.net/developer/software/dot-box-and-evb-software/data-packet-format/

But we were also expecting to get an information such as 05xxxx 08xxxxxx and so on, since 05 means that the following two bytes indicate lux and 08 means that the following three bytes indicate pressure.

What are doing wrong? Can you please help us?

Thank you very much in advance for your support and assistance.

[Antonio Fernandez]

I solved the problem.
I changed the configuration of Firewall.

[Antonio Fernandez]

Hello Leon Lindenfelser:
thank you very much, the device works.
the mistake was the version of the device(MTDOT-BOX/EVB).
your suggestion was what I was looking for.

kind regards.
Antonio

[Author]

Posts