XDOT NA1-00 MODULE ERR MESSAGE
- This topic has 1 reply, 2 voices, and was last updated 8 years ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
Mark Ruys.
son hyochulhI
XDOT NA1-00 MODULE ERR MESSAGE
Even if reset, the same message is repeated even if “+++” is sent.
Tell me how to change back to AT terminal mode.(delete lora config )
The same is true if the firmware is rewritten.
Reset timing is too fast, so +++ can not be input
—————————————————————————–
[tera term monitor display message]
Joining network…
Joining network…
Joining network… Network Join failed
ERROR
Joining network… Network Join failed
ERROR
Joining network… Network Join failed
ERROR
Joining network…
Waiting 1 s before next join attempt
Network Join failed
ERROR
Joining network…
Waiting 1 s before next join attempt
Network Join failed
ERROR
Joining network… Network Join failed
ERROR
Joining network…
Joining network… Network Join failed
ERROR
Joining network…
Waiting 1 s before next join attempt
Network Join failed
ERROR
Joining network…
Waiting 1 s before next join attempt
Mark RuysUpload a hello world application to your xDot which changes the join from AUTO_OTA to OTA. Run it once, then flash back the AT firmware.