xDot and IN865 Channel Plan
- This topic has 2 replies, 2 voices, and was last updated 7 years ago by .
Viewing 3 posts - 1 through 3 (of 3 total)
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.
I’m looking at supplying a small number of evaluation devices to a client in India using the IN865 channel plan but there appears to be no part listed for a compatible xDot. Would it therefore be acceptable to use the EU868 xDot with a IN865 channel plan with compatible gateways in India?
Thanks
Andrew
The EU xDot hardware is compatible for use with IN865 channel plan.
The xDot 915 vs 868 only differ in the tuning capacitors for the chip antenna on the development board. The RF paths on the module itself are identical.
We recently found the Rx2 window was incorrect in the IN865 channel plan.
The dev libraries have the correct frequency now.
https://github.com/MultiTechSystems/libxDot-dev-mbed5/blob/master/plans/ChannelPlan_IN865.cpp
Thanks for the update.
Andrew