upgrade to mlinux 3.3.7

[luis santos]

Hi, I have upgrade the multiconnect conduit with lora mlinux firmware to version 3.3.7. Using the Pre-built Images available (http://www.multitech.net/mlinux/images/). I have follow the manual (http://www.multitech.net/developer/software/mlinux/using-mlinux/flashing-mlinux-firmware-for-conduit/). After doing the reboot and done the upgrade, i can’t start the lora-network-server.
I get this output:
root@mtcdt:~# /etc/init.d/lora-network-server start
Lora hardware not detected
/etc/init.d/lora-network-server: Lora hardware not detected

But doing a dmesg i can see the lora module been detected:
[INFO] mts-io:load_port:674: no accessory card inserted in port 1
[INFO] mts-io:load_port:709: accessory card 2 vendor-id: Multi-Tech Systems
[INFO] mts-io:load_port:710: accessory card 2 product-id: MTAC-LORA-868
[INFO] mts-io:load_port:711: accessory card 2 device-id: 19165380
[INFO] mts-io:load_port:712: accessory card 2 hw-version: MTAC-LORA-1.0
[INFO] mts-io:load_port:733: accessory card 2 eui: 00:80:00:00:A0:00:0D:95
[INFO] mts-io:lora_setup:60: loading LORA accessory card in port 2
[INFO] mts-io:lora_setup:90: created link [lora] to [ap2], success:0
[INFO] mts-io:lora_setup:189: ap_subdirs[port_index=1] = cde88420 ap_subdirs[port_index=1]=bf0e38d0

Help will be appreciate.

Cumps,

[Author]

Posts