Upgrade Node Red on conduit

Home › Forums › Conduit: AEP Model › Upgrade Node Red on conduit

Tagged: 

  • This topic has 3 replies, 2 voices, and was last updated 9 years ago by Eliz.
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 17, 2017 at 2:57 am #16340
    Eliz
    Participant

    Hi

    Is there a way that I can upgrade the current node red version that is on the conduit?

    I still have 0.11.1 and I have seen that there is a 0.16 version out already so it is a bit old and some of the newer modules can therefore not work on it. I saw that there was a similar inquiry about 6 months back – was any progress made in the meantime?

    January 17, 2017 at 3:23 am #16342
    Eliz
    Participant

    Will upgrading the AEP firmware upgrade nodejs and node red as well or not?

    January 17, 2017 at 9:14 am #16350
    Jeff Hatch
    Keymaster

    Eliz,

    Multitech is looking into whether Node-RED can be upgraded on the Conduit. This will be addressed Q1 2017, and hopefully Node-RED will get upgraded. Node-RED must be compiled for the Conduit ARM 5 instruction set. It may be possible to build a newer version for AEP Conduit, but it has not been researched.

    Jeff

    January 19, 2017 at 2:34 am #16405
    Eliz
    Participant

    I understand – thanks Jeff!

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.