Update Nodered
- This topic has 2 replies, 3 voices, and was last updated 7 years, 3 months ago by .
Viewing 3 posts - 1 through 3 (of 3 total)
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.
Home › Forums › Conduit: AEP Model › Update Nodered
Hi,
My gw came with nodered v0.11.1. But a need update to nodered v0.17.5.
I try to update using the npm install node-red cmd, but it fails.
I’m doing something wrong?
tks,
Luis,
The reason the npm install is failing is most likely that Node-RED has dependencies that need to be built locally on the Conduit. The Conduit does not have the build utilities installed because it does not have enough room on the device.
The new releases coming out for Conduit support Node-RED 0.15.3 and that is the farthest it can go on Node-RED due to the fact that node-js does not support the CPU instruction set (armv5) of the Conduit beyond version 0.10.48.
To summarize, Conduit cannot run anything beyond Node-RED 0.15.3, and node-js 0.10.48.
Jeff
Hi,
the multitech ftp site reports a new AEP firmware (v 1.4.4)
https://webfiles.multitech.com/wireless/mtcdt-x-210a/
but in the downloads page the last one is v 1.4.3
is it safely to upgrade it?
thanks in advance
max