Troubles connecting to the bootloader

Home › Forums › MultiConnect OCG › Troubles connecting to the bootloader

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • September 13, 2013 at 2:19 am #4676
    Jimmy Selling
    Participant

    Hello,

    we are currently working with a MultiConnect OCG MTCDP-H5 unit and are having some issues connecting to U-Boot.

    We have tried to follow the instructions found at Multitech homepage, using the external GPIO connections and connecting to a computer using the serial port.

    On the computer side we are setting up a serial terminal at 115200 baud and 8N1 . But the result is just 10 seconds of nothing and then a string of corrupted data coming from the OCG. It looks like something is wrong in our setup. Are some OCGs using a different serial setup?

    September 13, 2013 at 6:52 am #4677
    Jimmy Selling
    Participant

    Nevermind. It seems like someone had mixed up the cables on the external GPIO port and we were listening to the I2C instead.
    Now everything is working as expected 🙂

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.