Time on air

Home Forums mDot/xDot Time on air

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #27073
    Alex Baron
    Participant

    Hello guys,

    I have a system consisting of several xDot modules (xdot-firmware-3.0.0-US915-mbed-os-5.4.7.bin firmware).
    The system is configured for peer-to-peer mode. The system functions well.

    One device (A) sends data to another (B) and gets data from that device (B).
    I suppose that the total time on air (TX Data Rate DR13, Time On Air 57 ms for 128 bytes of data) should be:
    time on air from A to B (57 ms) plus time from B to A (57 ms). But I never get the total time on air less than 400 ms.

    Any of your suggestions, thoughts.

    Thanks for the support / help.

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.