Telnet list command to SF100-G

Home › Forums › iSMS › Telnet list command to SF100-G

Tagged: , ,

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • September 4, 2013 at 5:44 pm #4654
    Luis V
    Participant

    Hello every one,

    I have a new SF100-G (Firmware Version 1.50.7), sometimes the conection to port 80 (Web admin) and port 81 (API) broke because I use a Cisco router with Gigabit Ethernet. I resolved this shutdown the iSMS box, but right now I only get internet access to the box.

    Yesterday the iSMS crashed again, I resolved login in a telnet session, and get the box online again with the command “reboot”, like a linux box.

    Do you have a telnet command list supported by the SF100-G?

    What command I can use to get online again the box, without reboot and not loss the inbox and outbox SMS?

    Thanks very much for your time, sorry for my bad english but not is my language, gracias!

    September 5, 2013 at 8:43 am #4655
    Bryon Davis
    Moderator

    Hi Luis,
    Does the Cisco router allow you to lock the Ethernet port going to the SF100 to 100Mb? This may solve the problem. Another work around may be to put a simple 100Mb switch between the Gigabit switch and the SF100.

    When you Telnet to port 2222, you start a Linux shell. So many of the common Linux commands will be available.

    I’m not sure what commands will get the SF100 ports 80 and 81 working again. Both of these ports are handled by the boa process. You could try entering a “ps” command, finding the “/bin/boa” process, and then enter “kill <pid>” where the <pid> is the number in the far left column of the ps list. The SF100 will respawn a new boa process, and may then work.

    We will look into this problem and do some testing.

    Regards,
    Bryon

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.