MultiTech Developer Resources » Topic: SF800-G and spanned sms configuration

SF800-G and spanned sms configuration

Tagged: isms, spanned

This topic has 1 reply, 2 voices, and was last updated 5 years ago by Bryon Davis.

Viewing 2 posts - 1 through 2 (of 2 total)

Author

Posts
April 22, 2021 at 4:05 am #31749

Aleksey Maksimov
Participant

Hello.

By default, when sending a large text, our iSMS SF800-G device splits messages into parts and adds a prefix of the form (1of5), (2of5) and so on to each part.

As far as I understand, mobile operators and smartphones now support automatic splitting and joining of large text.

Please tell me how we can completely disable the spunning mechanism in the SF800-G.

April 26, 2021 at 5:39 pm #31763

Bryon Davis
Moderator

Hi Aleksey,
The 1.51.28 firmware adds the feature to support automatic splitting without the (1of5) type of messages.

SF400 and SF800 v1.51.28:
https://webfiles.multitech.com/engineering/unofficial-releases/iSMS%20(Formerly%20SMSFinder)/Firmware/SF400_SF800/1.51.28/SF400-800-u-v1.51.28-25Nov2014.zip

SF100 v1.51.28:
https://webfiles.multitech.com/engineering/unofficial-releases/iSMS%20(Formerly%20SMSFinder)/Firmware/SF100/1.51.28/SF100-u-v1.51.28-25Nov2014.zip

Upgrade to 1.51.28, then go to the SMS Settings menu, check “Enable PDU Mode” and “Concatenate Multipart Outbound Messages” and click save. Then in the same menu under ASCII 7-bit Configuration set the Character Set to “3GPP 23.038” and click save.
On the SF100 you should then go to Save&Restart and click Save to Flash memory.
Author

Posts

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.