RTC error: RTC initialization failed.

Home › Forums › mDot/xDot › RTC error: RTC initialization failed.

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • September 26, 2016 at 4:10 pm #14853
    Andrew Lindsay
    Participant

    Can anyone tell me what the error RTC error: RTC initialization failed means and how to get rid of it. This occurs after flashing new firmware to a brand new mDot. and has happened on at least 2 mDots now.
    This happens with the latest libmDot and previous release.

    Thanks.

    Andrew

    September 27, 2016 at 9:38 am #14871
    Darrik Spaude
    Keymaster

    Hi Andrew,

    According to our developers, the “RTC initialization failed” message has only been seen after flashing new firmware. A hard reset by removing power from the device has allowed the RTC to be initialized properly.

    September 27, 2016 at 9:43 am #14872
    Andrew Lindsay
    Participant

    I’ll try this again. I did have some mDots that had failed first time, swapped for new one, then put them back so they had been powered off.

    Let me retry and get back to you.

    Thanks

    Andrew

    September 27, 2016 at 11:59 am #14880
    Darrik Spaude
    Keymaster

    At what voltage are the mDots being powered?

    September 27, 2016 at 6:43 pm #14891
    Andrew Lindsay
    Participant

    mDots are powered by 3.6V LTC cell.

    All seems to be working now.

    Thanks.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You cannot reply to this topic.