Receive Window 2
- This topic has 1 reply, 2 voices, and was last updated 8 years, 8 months ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
Home › Forums › Conduit: mLinux Model › Receive Window 2
Is Receive Window 2 disabled by default?
Looking for RF power, I see the conduit transmit in window 1, but I don’t see anything in the 2nd window, 1s later.
Is there any indication in the logs when the conduit is sending in window 2?
Are there any settings that can affect whether it sends or not – I think from the 0.0.9 release notes, it sounds like it can be disabled? Or in my case I’d like to know how to enable it?
Thanks,
Jeff
Rx2 will be used if Rx1 is not available when queuing a downstream packet.
This would happen if packets are received from two or more motes at the same time. Since the downstream packets for Rx1 overlap, Rx2 will be used.