problems with SIM card unlocking

Home › Forums › Conduit: AEP Model › problems with SIM card unlocking

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 22, 2015 at 2:17 am #8675
    Michal
    Participant

    Hi,
    While configuring Multitech Conduit gateway to use cellular network I’ve met some problems with SIM card unlocking. I’ve entered SIM card pin number, apply changes and SIM card has been unlocked – module setup cellular connection. Problem happened after gateway restart – there is information that SIM card is locked even SIM card pin number is entered.
    Problem could be temporarily omitted by deleting pin number, applying changes and entering it once again. Then SIM card is unlocked and module start cellular connection.

    Temporary solution is problematic while gateway will work in the field. Is there any fix for that?

    I will add that latest AEP software (version 1.0.25-Beta) is installed.
    Serial Num: 18213024.

    July 22, 2015 at 10:36 am #8679
    Brandon Bayer
    Blocked

    Hey Michal,

    I’ve filed a bug report on this, and we’ll look into it!

    Thank you,
    Brandon

    August 6, 2015 at 2:11 pm #8814
    Brandon Bayer
    Blocked

    For the record, I found and fixed this bug. It’ll be fixed in the release version of firmware.

    -Brandon

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.