Packet forwarder question

Home › Forums › Conduit: AEP Model › Packet forwarder question

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • June 14, 2016 at 6:57 am #13157
    Arnaud CESBRON
    Participant

    Is it possible to install ‘Lora Packet Forwarder 1.4.1-r9’ with is in mLinux on an AEP model ?

    June 14, 2016 at 7:12 am #13159
    Jason Reiss
    Keymaster

    You can check the currently installed version with:

    > opkg list | grep lora

    If the version is not at 1.4.1 r9, upgrade with the mLinux package.

    AEP 1.1.2 should have that version installed by default.

    June 14, 2016 at 10:41 am #13188
    Arnaud CESBRON
    Participant

    thanks

    June 14, 2016 at 10:45 am #13191
    Arnaud CESBRON
    Participant

    It’s already the last version. I ask this question because i try to use
    brocaar/lora-semtech-bridge and it doesn’t work.
    Is there any one who try this ??????

    June 19, 2016 at 8:24 am #13392
    wojtek t
    Participant

    What is happening exactly?
    I use this one and Polypacket forwarder on modified mLinux (to AEP) without any problems.

    June 20, 2016 at 8:57 am #13394
    Arnaud CESBRON
    Participant

    I have this message :
    time=”2016-06-20T15:38:30+02:00″ level=error msg=”gateway: could not handle pack
    et: gateway: invalid protocol version” addr=192.168.1.93:41708 data_base64=ASnNA
    gCAAAAAALbF

    I use the default packet forwarder on a EAP config.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.