Node-red: Lora node restart only

[Asier Galech]

Hi,

One problem, I send more than 90 message to Lora output in short time. The Node “lora input”, logger in log “Connected to MQTT for LoRa in node” and this node stops working. While the log lora-network-server observed following packets arriving by Lora but in “Lora in” node messages do not generate event “data”.

Thanks

[Jeff Hatch]

Asier,

Could you provide more precise steps to recreate this behavior?

Jeff

[Asier Galech]

Jeff,

When the “lora in” and “lora out” have many request in little time. In the log is written ” Connected to MQTT for LoRa in node.” and then these nodes not generate the “data” event to new messages sending from Lora devices.

Asier

[Jeff Hatch]

Asier,

Could you open a support case at https://support.multitech.com and give a detailed description of what you’re trying to do. Please include what data you are sending, what frequency your are sending the data, how many nodes you have, and any other pertinent information about your application.

Thank You,

Jeff

[Author]

Posts