Node-Red: Lora In node and port

[nicolas regimbal]

Hi all,

I just observed that in Node-Red, the Lora In node does not output the port…
is it normal?
Could someone tell me if it is possible to get it?

Thanks a lot,

Nicolas

[Jason Reiss]

Are you running the latest AEP version?

http://www.multitech.net/developer/downloads/

[nicolas regimbal]

Yep!
And the not-so-good news is this is possible to set it for the lora out node.
Nothing for the Lora In one…

[Jason Reiss]

By “Yep!” you mean AEP 1.1.2?

You can double check the network server version with
/opt/lora/lora-network-server –version

With the lora-network-server 0.0.9 the port should be in the MQTT up packets and is an option for down packets.

Just set the port in the packet sent to the lora out node.

[nicolas regimbal]

Yes, sorry, this is what I meant.
If I feel understood you suggest I use MQTT port to connect to the Lora Network Server to get the port of every upstream message the conduit receives.
Now, could it be possible to fully replace the lora in/out nodes with MQTT ones (that would make perfect sense), or shall i use the both of them?

Thanks again.

[Author]

Posts