multitech conduit failed to start concentrator

Home Forums Lora Network Server multitech conduit failed to start concentrator

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #32200
    televisedbrain
    Participant

    Hello,
    I’ve been having issues with the packet forwarder not running on the Multitech Conduit. I restarted the network server and it told me the concentrator failed to start. This is the log:

    *** Beacon Packet Forwarder for Lora Gateway ***
    Version: 4.0.4
    *** Lora concentrator HAL library version info ***
    Version: 5.0.1-mts-7;
    ***
    INFO: Little endian host
    INFO: found global configuration file global_conf.json, parsing it
    INFO: global_conf.json does contain a JSON object named SX1301_conf, parsing SX1301 parameters
    INFO: lorawan_public 1, clksrc 0
    INFO: LBT is disabled
    INFO: antenna_gain 3 dBi
    INFO: Default Temperature Compensation
    INFO: Configuring TX LUT with 16 indexes
    INFO: radio 0 enabled (type SX1257), center frequency 868500000, RSSI offset -162.000000, tx enabled 1, tx_notch_freq 129000
    INFO: radio 1 enabled (type SX1257), center frequency 867500000, RSSI offset -162.000000, tx enabled 0, tx_notch_freq 0
    INFO: Lora multi-SF channel 0> radio 0, IF -400000 Hz, 125 kHz bw, SF 7 to 12
    INFO: Lora multi-SF channel 1> radio 0, IF -200000 Hz, 125 kHz bw, SF 7 to 12
    INFO: Lora multi-SF channel 2> radio 0, IF 0 Hz, 125 kHz bw, SF 7 to 12
    INFO: Lora multi-SF channel 3> radio 1, IF -400000 Hz, 125 kHz bw, SF 7 to 12
    INFO: Lora multi-SF channel 4> radio 1, IF -200000 Hz, 125 kHz bw, SF 7 to 12
    INFO: Lora multi-SF channel 5> radio 1, IF 0 Hz, 125 kHz bw, SF 7 to 12
    INFO: Lora multi-SF channel 6> radio 1, IF 200000 Hz, 125 kHz bw, SF 7 to 12
    INFO: Lora multi-SF channel 7> radio 1, IF 400000 Hz, 125 kHz bw, SF 7 to 12
    INFO: Lora std channel> radio 0, IF -200000 Hz, 250000 Hz bw, SF 7
    INFO: FSK channel> radio 0, IF 300000 Hz, 125000 Hz bw, 50000 bps datarate
    INFO: global_conf.json does contain a JSON object named gateway_conf, parsing gateway parameters
    INFO: gateway MAC address is configured to 000000000000000
    INFO: server hostname or IP address is configured to “127.0.0.1”
    INFO: upstream port is configured to “1780”
    INFO: downstream port is configured to “1782”
    INFO: downstream keep-alive interval is configured to 10 seconds
    INFO: statistics display interval is configured to 20 seconds
    INFO: upstream PUSH_DATA time-out is configured to 120 ms
    INFO: duty cycle will NOT be enforced
    INFO: max tx power 27
    INFO: duplicate packets received with low SNR will NOT be forwarded
    INFO: packets received with a valid CRC will be forwarded
    INFO: packets received with a CRC error will be forwarded
    INFO: packets received with no CRC will NOT be forwarded
    INFO: Reference latitude is configured to 0.000000 deg
    INFO: Reference longitude is configured to 0.000000 deg
    INFO: Reference altitude is configured to 0 meters
    INFO: GPS is disabled
    INFO: Auto-quit after 60 non-acknowledged PULL_DATA
    ERROR: [main] failed to start the concentrator, resetting lora and trying again
    ERROR: [main] concentrator cannot be started, exiting

    Does anyone have any suggestions on how to resolve this?
    Thank you in advance.

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.