Multiple WAN connection Failover control

Home › Forums › Conduit: AEP Model › Multiple WAN connection Failover control

Tagged: 

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • May 24, 2019 at 10:23 am #27886
    robert.miller@meau.com
    Participant

    Im using a Conduit AEP with Wifi, 2 ethernet ports, and Cell. I have the 2nd hardwire port set as DHCP, Wifi is not connected or setup, and cell is setup. I am trying to get it to use CEll first, then fail to HArdwire, then fail to Wifi. I have this setup in this order under wan settings
    How can I tell which one its currently using. It seems to see the hardwire connection and never try the cell connection after booting up?

    May 28, 2019 at 8:16 am #27888
    Jeff Hatch
    Keymaster

    Robert,

    The “route -n” command should tell you which interface that the default route is set to. This will tell you what WAN the device is using. Then check the cellular interface status. Between the dashboard “home” page and the radio status you can see the status of the cellular connection.

    Jeff

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You cannot reply to this topic.