Multiple Gateways Payload

Home Forums Lora Network Server Multiple Gateways Payload

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #31680

    Hi,

    I have two Multitech Gateways (MTCDT-246A) from which 1st gateway is setup as Network server and the 2nd as Packet forwarder. I have followed the procedure mentioned here (http://www.multitech.net/developer/software/lora/lora-network-server/networking-conduits/) and the 2nd gateway(pf) can be seen in Gateways section of the 1st gateway(server).
    Now, how can the received packets be seen in node red? Using a LoRa input node is not showing nothing. Can someone please comment on this.

    Cheers.

    Regards,
    Ali Aqdas

    #31681
    Jason Reiss
    Keymaster

    Are your devices joined to the network?

    Is node-red running on the 1st gateway or 2nd gateway? Only the 1st gateway would have packets arrive.

    #31682

    Thanks for the reply. Yes the gateways are on same network and node-red is running on the 1st Gateway.

    #31683
    Jason Reiss
    Keymaster

    What about the end-devices? How are they configured to connect to the LoRaWAN network?

    Are you connecting with ABP or OTAA?

    #31684

    1st gateway is running at 915MHz and 2nd Gateway is running at 923MHz. The End device is running at 923MHz configured with App EUI and App key of 1st gateway connecting with OTAA.

    #31685
    Jason Reiss
    Keymaster

    Both gateways must be configured for the same channel plan.
    Only one channel plan is supported by the embedded network server.

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.