Multichannel plan both AU915 & AU923

Home › Forums › Conduit: AEP Model › Multichannel plan both AU915 & AU923

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • August 20, 2020 at 8:02 pm #31105
    ali.aqdas@sencom.com.au
    Participant

    Hi,

    Is it possible to configure the gateway to listen on two separate frequency plans such as AU915 and AU923? So that new sensors/LoRa nodes supporting AU923 plan can be adjusted in an existing network rather than setting up a separate gateway.

    Cheers.

    Regards,
    Ali Aqdas

    August 28, 2020 at 9:52 am #31109
    Jason Reiss
    Keymaster

    With two cards installed this can be done in packet forwarder mode to remote servers.

    If you are using the embedded network server this mode of operation is not supported.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.